自制小型振动台的优点是成本低,制作维修方便,能满足产品质量要求。主要装置是普通平板振捣器。台面用8～10毫米厚铁板制作,一般为1×1或1×0.7米,根据需要确定,焊两根0.5米长∟60×6角钢,把平板振捣器用螺栓固定在角钢上。压簧8个,管子头若干,底座用[12号槽钢焊成。安装时,小型振动台台面可与地面等高或高出 The advantage of self-made small vibration table is low cost, convenient production and maintenance, and can meet product quality requirements. The main device is an ordinary flat-plate vibrator. The countertop is made of 8 to 10 mm thick iron plate, generally 1×1 or 1×0.7 meters. According to the requirements, two 0.5-meter-long ∟60×6 angle steels are welded, and the flat-plate vibrator is bolted to the angle steel. There are 8 compression springs, a number of pipe heads, and the base is welded with channel #12. When installing, small vibration table tops can be raised or raised from the ground