论文部分内容阅读
为配合我省建筑公司推广“内装外砌”住宅建筑体系,我厂采用了一种成组立模工艺生产混凝土内墙板.这种用成组立模工艺生产的混凝土内墙板基本上是两种.一种是纵向内墙板,适用于进深为4.8米及4.5米;另一种是横向内墙板,适用于开间为3.6米、3.3米、2.7米及2.4米;适用的楼层高度为2.8米及3.0米;内墙板厚度为10厘米,为满足楼板的搭接长度,内墙板顶部每边出檐为3厘米,檐高为10厘米.我们利用露天一个地坑(长7.4米,宽4.7米)进行了适当的改造,安装了一组10模9板的成组立模,生产周
In order to cooperate with the construction company of our province to promote the “built-in exterior bricklaying” residential building system, our factory has adopted a group of vertical molding technology to produce concrete interior wall panels. This concrete interior wall board produced by the grouping vertical molding process is basically Two. One is a longitudinal interior wall panel, suitable for a depth of 4.8 meters and 4.5 meters; the other is a horizontal interior wall panel, suitable for an opening of 3.6 meters, 3.3 meters, 2.7 meters and 2.4 meters; applicable floor height 2.8m and 3.0m; inner wall thickness is 10cm, to meet the lap length of the floor, the top of the inner wall board is 3cm on each side and the height is 10cm. We use a pit in the open air (length 7.4 m, width 4.7 m) was appropriately modified and a group of 10 moulds and 9 plates of grouped standing molds were installed for the production week