本文介绍的是适用于16K×8存储器模块方案,采用2 1/2D—3W的存取方式,选用外径0.6mm的宽温磁心,存储加的读写周期可达950ns,取数时间为450ns。该存储模块设计为一折叠式结构,它由一块字驱动器板,两块位驱动器板和一块磁心板组成,字驱动器板上有字驱动器和恒统源,每块位驱动器扳上有四位位驱动器。四位读出放大加以及四位数位电路,磁心板为双面板,每面有16K×4位,即256×256颗磁心构成,磁 This article describes the program for 16K × 8 memory modules, using 2 1 / 2D-3W access mode, the choice of wide-temperature core 0.6mm OD, storage plus read and write cycles up to 950ns, the number of access time 450ns . The storage module is designed as a folding structure which consists of a word driver board, two bit driver boards and a magnetic core board. The word driver board has a word driver and a constant source, and each bit driver has four bits driver. Four read amplification and four-digit circuit, the core board is a double-sided board, each side has 16K × 4, that is 256 × 256 core composition, magnetic