论文部分内容阅读
Mechanism of Surface Depression on Foam Glass
【机 构】
：
College of Materials Science and Engineering, Beijing University of Technology, Beijing 100124, Chin
【出 处】
：
武汉理工大学学报（材料科学版）（英文版）
【发表日期】
：
2016年3期
其他文献
Fabrication and Properties of Ag/Mg0.2Zn0.80/La0.67Ca0.33MnO/p+-Si Resistive Switching Heterostructu
Mg0.2Zn0.8O (MZO)/La0.67Ca0.33MnO (LCMO) heterostructure was deposited on p+-Si substrates by sol-gel spin coating technique.The Ag/MZO/LCMO/p+-Si devices exhibit a bipolar,reversible,and remarkable current-voltage characteristic at room temperature.An ob
Performance of Concrete Subjected to Severe Multiple Actions of Composite Salts Solution under Wet-D
Several action regimes were employed, namely, those exposed to solutions containing single and/or composite chloride and sulfate salts, and under wet-dry cycles and/or flexural loading. The variations in dynamic modulus of elasticity (Erd values) were mon
Influence of Asymmetric Monotonic Hot Rolling on Microstructures and Mechanical Property of Microall
For refining grain and obtaining excellent properties,the experiments of asymmetric and symmetric monotonic hot roiling were carried out to investigate the role of shear strain on the microstruetures and mechanical properties of V-microalloyed steel.The s
The microstructure,tensilc property and wear resistance of 7075 aluminum matrix composite reinforced with TiC particles prepared by in-situ reaction casting were investigated.The effect of TiC reinforcement on wear behavior was analyzed.The wear mechanism
Fabrication and Characterization of 3D Graded PDMS Scaffolds Using Vacuum-Assisted Resin Transfer Mo
Graded porous scaffold can be applied to study the interactions between cells and scaffold with different pore sizes.Polydimethylsiloxane(PDMS)scaffold with an axial pore size grade was successfully manufactured via vacuum-assisted resin transfer moulding
Use of Different Barium Salts to Inhibit the Thaumasite Form of Sulfate Attack in Cement-based Mater
We investigated the effects of different barium compounds on the thaumasite form of sulphate attack (TSA) resistance of cement-based materials when they were used as admixtures in mortars. Moreover, we analyzed the inhibition mechanisms within different t
Effective Microstructure Unit in Control of Impact Toughness in CGHAZ for High Strength Bridge Steel
The high strength bridge steel was processed with the simulated coarse grain heat affected zone (CGHAZ) thermal cycle with heat input varying from 30 to 60 kJ/cm, the microstructures were investigated by means of optical microscope (OM), scanning electron
The Sm3+-doped SrO-Al2O3-SiO2 (SAS) glass-ceramics with excellent luminescence properties were prepared by batch melting and heat treatment. The crystallization behavior and luminescent properties of the glass-ceramics were investigated by DTA, XRD, SEM a