一、爆炸装置的制作1．取出电子打火机里的电子打火器。选一根长约30—40cm的单芯导线，（型号与电子打火器上的单芯导线相同。）与电子火器上的单芯导线相连接，接头处缠上绝缘胶布。再在单芯导线的顶端去掉绝缘层．露出金属内芯1-2mm。（如图1）图12．取一块木板，在其一端固 First, the production of explosive devices Remove the electronic lighter in the electronic lighter. Select a length of about 30-40cm single-core wire, (the same type of single-core wire on the electronic flame arrester.) And single-core electronic firearms connected to the connector wrapped around insulating tape. Then remove the insulation at the top of the single core wire. Exposed metal core 1-2mm. (Figure 1) Figure 12. Take a piece of wood, solid at one end