论文部分内容阅读
Characteristics analyzing and parametric modeling of the arc sound in CO2 GMAW for on-line quality
【机 构】
：
StateKeyLaboratoryofGansuAdvancedNon-ferrousMetalMaterials
【出 处】
：
China Welding
【发表日期】
：
2006年2期
【基金项目】
：
The work was supported by National Natural Science Foundation of China （ No. 50275028）.
其他文献
It has been widely studied about the final residual stress and deformation in multipass welding of thick weldments. But there is a lack of a clear understanding
Nonlinear methods are used to analyze current signal of spot welding and the minimum embedding dimension,correlation dimension,the optimal time delay and the la
The normally centered electron beam and non-centered electron beam welding of TiAl to TC4 was investigated in order to analyze the electron beam weldability bet
Ti-based filler metals made by transient solidification and normal crystallization were selected for the vacuum brazing of the TiAl alloy and 42CrMo under diffe
The 2DOF dynamic equations of the double railway suspended vehicle for automatic transportation in the welding shop are established. The sensitivities are analy
Image sensor has been one of the key technologies in intellectualized robotics welding.Edge detection plays an important role when the vision technology is appl
This paper mainly concentrated on the feasibility of friction stir welding of dissimilar metal of aluminum alloy to copper (T2) and a preliminary analysis of we
This paper presents the results of a research into capacitor discharge percussion welding (CDPW) of pure aluminum wires and pure copper sheets,using percussion
The small punch test technique (SPT) was used to evaluate the mechanical properties of various materials and the basic method to test material tensile mechanics