【摘 要】
:
The addition of a small amount of oxygen improves the mechanical properties,especially plasticity,of Ti45.7Zr33Ni3Cu5.8Be12.5 amorphous alloy composites (AACs)
【机 构】
:
Key Laboratory for Anisotropy and Texture of Materials (MOE),School of Materials Sciences and Engine
论文部分内容阅读
The addition of a small amount of oxygen improves the mechanical properties,especially plasticity,of Ti45.7Zr33Ni3Cu5.8Be12.5 amorphous alloy composites (AACs) at room temperature (298 K).Compared to the plasticity of AACs without added O (5%),the plasticity of the composites with 0.73 at.% O (nominal composition) was much higher (11%).Even at O content higher than 0.73 at.%,the AACs exhibited good plasticity.The highest plasticity of ~12.3 % was observed with 2.87 at.% O.Two distinct mechanisms are proposed to explain the enhanced plasticity of the AACs.At low O content,although deformation-induced phase transformation was suppressed,a substantial amount of α\'\'martensite was formed.The microstructural features of α\'\'martensite,such as thinner laths and homogeneous distribution,induced the formation of multiple shear bands in the amorphous matrix.At high O content,deformation-induced phase transformation was seriously suppressed.A dispersed nano ω phase was formed during rapid solidification in AACs with O content higher than 1.45 at.%.This resulted in a weakening in the anisotropy of β dendrites and led to their homogenous deformation.Furthermore,multiple shear bands were formed in the amorphous matrix.Apart from plasticity,the strength of the AACs also increased with an increase in the O content.This phenomenon was explained in terms of three mechanisms,viz.the solid-solution-strengthening effect of O,fine-grain strengthening of β dendrites,and secondary phase strengthening by the nano ω phase.
其他文献
Laser powder bed fusion (L-PBF) was utilized to produce specimens in Ti-6Al-4V,which were subjected to a bi-lamellar heat treatment,which produces microstructur
In this work,the beneficial effect of Sn addition on the corrosion resistance mechanism of Cr-Mo low alloy steel was studied.Results demonstrated that Sn improves the corrosion resistance of the steel matrix mainly by influencing the microstructural trans
The highly thermal stability precipitates strengthen creep resistance for alloys,which require precipitates to resist coarsen at elevated temperature.In the Mg-
In this study,we successfully prepared a Mg-6Zn-0.2Ca alloy by utilizing sub-rapid solidification(SRS)combined with hard-plate rolling(HPR),whose elongation-to-failure increases from~17%to~23%without sacrificing tensile strength(~290 MPa)compared with its
Combining dissimilar materials in a single component is an effective solution to integrate diverse material properties into a single part.Copper-stainless steel
基于信息技术的发展,高校图书馆服务的创新,本文主要对创客空间进行介绍,阐述高校图书馆构建创客空间的意义,提出相应的创客空间信息服务新模式,期以能够对高校图书馆创客空间信息服务模式的构建及优化提供帮助。
The alloying effects of Ni,W and Cr on the microstructural stability of CoNi-base alloys were investigated using a multicomponent diffusion multiple after being
本文主要对10kV配电变压器不同理论模型中的电磁暂态耦合机理及谐波振荡特性进行了理论分析,并通过现场试验及软件仿真的方式,提出了兼顾高低频段电磁耦合特性的配电变压器宽频等效模型,并通过现场试验及软件仿真方式验证了该模型的正确性,为10 kV配变过电压研究提供了理论参考。
This study reports on the effect of the addition of Glycine to Hank's solution on the in-vitro corrosion behavior of AZ31 magnesium (Mg) alloy at 37 ℃ and a p
本文以“互联网+教育”为背景,融合混合式教学,以高职高专经济管理类专业学生人才培养方案为依据,以“市场调查与预测”课程为主体,构建“多角度分析、多形式施教、分层次评价、全方位发展”的四位一体差异化教学模式。通过实践验证了该模式能有效调动学生的学习兴趣,提升教学效果,培养学生的综合能力,可为高职高专院校其他课程建设提供借鉴。