论文部分内容阅读
上周我家终于上网了,虽说用的是最老土的拨号上网,但毕竟能在家里收发Email了。我买的是TP—LINK的内置猫(ESS芯片),装入我那2000年组装的机器(雷鸟850MHz、256MB的KingMax、Elsa TNT2、Soltek75—KV)。开机后Win2000发现了小“猫”,装好了小猫的驱动,但在重启之后发觉竟不能上网。去“设备管理器”中发现,猫和并口有冲突——中断设置都为7,而且在Win2000中不能改动它们,于是我就到BIOS中改,无效。我本着先软后硬的原则想,反正我也没并口设备,把并口屏蔽了不就没冲突了?我就去BIOS中把并口屏蔽了,这下终于能冲浪了！
Last week my family finally online, although the oldest is used dial-up Internet, but after all, can send and receive Email at home. I bought TP-LINK’s built-in cat (ESS chip) and loaded it into my 2000-assembled machine (Thunderbird 850MHz, 256MB KingMax, Elsa TNT2, Soltek75-KV). Win2000 found a small “cat”, installed a kitten driver, but after the restart found that actually can not access the Internet. Go to the “Device Manager” found that there are conflicts between cats and parallel port - interrupt settings are 7, and can not be changed in Win2000, so I went to the BIOS change, invalid. I am in line with the principle of soft first think, anyway, I did not parallel device, the parallel port is not blocked there is no conflict? I went to the BIOS to parallel port shielding, which finally under the surf!