摩托车用钢索可以用一小截自行车内胎来上润滑油。窍门就在于截取自行车内胎时,一定要取带有气门芯的那段。在气门芯两端各约80mm处截断,然后将这段自行车内胎的一端扎紧,从另一端灌进润滑油,再将钢索末端探入,将自行车内胎口与拉线一起绑扎好,然后将打气筒接到气门芯上打气,当压力达到一定值时,润滑油就进入钢索内的钢丝 Motorcycle cable can use a small section of bicycle inner tube to lubricate. The trick is to intercept the bicycle inner tube, we must take with the valve core that period. The valve core at both ends of about 80mm at the cut off, and then this section of the bicycle inner tube tying one end, from the other end into the lubricating oil, and then explode into the end of the cable, the bicycle inner liner and lash together, and then Pump connected to the valve core cheer, when the pressure reaches a certain value, the oil into the wire inside the wire