【摘 要】
：
A carrier method for separating out-of-plane displacement from in-plane components based on large image-shearing shearography is presented. A reference surface is fixed on the side of a test object. They are illuminated by two expanded symmetric illuminat
【机 构】
：
CollegeofPhysicsandElectronics,ShandongNormalUniversity,Ji'nan250014DepartmentofMathematicsandPhysi
【出 处】
：
ChineseOpticsLetters
论文部分内容阅读
A carrier method for separating out-of-plane displacement from in-plane components based on large image-shearing shearography is presented. A reference surface is fixed on the side of a test object. They are illuminated by two expanded symmetric illuminations respectively. The carrier is introduced by rotating the reference surface to modulate the displacement of an object. By using Fourier transform to demodulate the modulated fringe pattern, two phase maps, which include out-of-plane and in-plane displacements, can be obtained. Then the out-of-plane displacement can be easily separated from in-plane displacement by subtraction and addition of the two unwrapped phase distributions. The principle of the method is presented and proved by a typical three-point-bending experiment. Experimental results show that the method enjoys high visibility of carrier fringes. The system does not need a special beam as a reference light and has simple optical setup.
其他文献
With 4.28-km dispersion-flattened fiber (DFF), more than 254.9-nm 10-dB bandwidth on the right side of zero-dispersion wavelength and a 190.4-nm wide spectral region with the uniformity of within -0.5 dB are obtained. While on the opposite side, 198.4-nm
基于Zernike相衬法原理和相衬板设计理论,利用金属材料Ag具有宽角度消偏振的特性,设计一种低偏振效应的移相膜。采用光刻及镀膜法,研制了可用于相衬显微镜中的新型结构相衬板。通过控制介质膜和金属膜的物理厚度,分别调节相衬板的相位和透过率,提高相衬度;通过优化光刻及制备薄膜的工艺参数,得到高质量的圆环结构。最终获得振幅透过率为18.03%,相移量为0.49π的相衬板。
研究了一种对数螺线柱面晶体配接针孔对Z箍缩铝等离子体进行单色谱成像的摄谱成像仪，摄谱仪具有结构简单、外形尺寸紧凑的特点。由于对数螺线晶体的保角特性，摄谱成像仪可在较大视场范围内对Z箍缩内爆等离子体进行单色谱成像。在“阳”加速器上，针对Z箍缩铝等离子体K壳层的X射线辐射进行了成像实验，得到了铝丝阵内爆等离子体的类氢(1727.7 eV)和类氦线(1588.3 eV)单色图像。在箍缩单色图像上观察到了磁瑞利泰勒不稳定性引起的“热点”及内爆不稳定性造成的螺旋形结构，反映了等离子体的内爆形态，为进一步理解Z箍缩物
We report the first demonstration of group delay tuning with stimulated Raman scattering-induced dispersion in a hydrogen-filled hollow-core optical fiber. A pump laser induces a sharp refractive index change near the S0(0) Raman transit
The flat endface of an optical fiber tip is an emerging light-coupled microscopic platform that combines fiber optics with planar micro- and nanotechnologies. Since different materials and structures are integrated onto the endfaces, optical fiber tip dev
在椭偏测量中,采用直通式标定方法准确标定出系统模型参数对于样品的精确测量至关重要。由于双旋转补偿器式Mueller矩阵椭偏仪(DRC-MME)高级参数模型复杂,参数数量较多,且部分高级参数之间存在相互级联和耦合,为保证标定结果的准确性,实验中各个参数之间的独立性关系需要被检验。针对这一问题,使用奇异值分解、泡利矩阵和其他数学工具,从理论上对DRC-MME直通标定实验的自由度进行研究分析,明确在数据拟合过程中的“无用”参数,并通过仿真实验验证研究分析结果的正确性。最后搭建实验平台,开展了直通标定实验,得到了
利用电沉积的方法将天然水中的痕量汞离子富集到一个高纯铜棒表面，从而克服用等离子体光谱技术直接分析水样品时水珠溅射的影响和水分子对等离子体中原子辐射的淬灭效应。激光点火显著提高了火花放电的稳定性，降低了放电电压和电流，并同时增强了火花放电等离子体中汞的原子辐射。采用激光点火辅助火花诱导击穿光谱（LI-SIBS）技术，并在富集电压为7.5 V，富集时间为10 min，放电电压为4000 V的条件下实验得到天然水中汞离子的校正曲线。该技术对于水中汞离子的检出限能够达到1 μg/L质量浓度，没有附加污染和汞的记忆
提出一种用全光学开关构成时分复用系统的方法,并用ZnS干涉滤光片双稳开关进行了实验演示.如果采用高速开关进行替代,可望用于光通信与光计算系统,提高信息的传输速度.