【摘 要】
：
An optically addressed liquid crystal light valve based on the photoconductive effect of the Bismuth Silicate (BSO) layer is presented. The transmittance of read beam (1 053 nm) through the light valve changes with the intensity of address beam (470 nm) p
【出 处】
：
ChineseOpticsLetters
论文部分内容阅读
An optically addressed liquid crystal light valve based on the photoconductive effect of the Bismuth Silicate (BSO) layer is presented. The transmittance of read beam (1 053 nm) through the light valve changes with the intensity of address beam (470 nm) projected onto the BSO layer. Beam shaping for 1 053-nm coherent light by using this device is reported. The device has the advantage of high transmittance and it can overcome the problem of black-matrix effect compared with the traditional thin film transistor (TFT) liquid crystal modulator.
其他文献
Depth perception for night vision (NV) imagery could largely improve scene comprehension. We present a novel scheme to give fused multi-band NV imagery smoothly natural color appearance as well as depth sense from color. Our approach is based on simulatin
A high sensitivity D-shaped hole double-cladding fiber temperature sensor based on su
The mode-locked fluoride fiber laser (MLFFL) is an exciting platform for directly generating ultrashort pulses in the mid-infrared (mid-IR). However, owing to difficulty in managing the dispersion in fluoride fiber lasers, MLFFLs are restricted to the sol
研究了高重心小抛光面的方形工件(抛光面大小30 mm×30 mm, 高90 mm)环形抛光中, 倾覆力矩对工件面形的影响。通过分析方形工件在工件孔中的运动轨迹及受力情况, 发现了工件与工件孔壁碰撞会导致工件倾斜, 高重心的工件在碰撞时倾斜幅度较大, 倾斜角度和工件与工件孔壁间的间隙有关。重心较高的方形工件, 以及工件与工件孔壁间隙的增大都会增加由倾覆力矩导致的面形变凸与畸变。在高重心小抛光面的方形工件侧面粘接玻璃靠体后, 工件的重心降低, 工件孔与工件间的间隙减小, 成功解决了面形变凸与畸变的问题, 面形
CN自由基在碳化物的燃烧过程中一直扮演着重要的角色。采用量化计算方法对CN自由基进行了从头计算。首先利用Hartree-Fock自洽场方法进行轨道计算,再使用完全活性空间自洽场对轨道进行优化,然后采用多参考组态相互作用的方法计算了在006到07 nm的核间距范围内CN自由基3个低激发态(X2Σ ,A2Π和B2Σ )的势能曲线。为了进一步提高计算的精度,考虑相对论效应选择aug-cc-pV5Z-dk相关一致基组。求解径向薛定谔方程,得到了各电子态振-转能级的能量和振-转常数,并拟合获得这些电子态的光谱常
增加测量信息可以有效降低荧光分子断层成像(FMT)重建的病态性,但随着数据增多,重建耗时也会显著增加。为了降低FMT重建的病态性和提升大规模数据集下的重建效率,结合对偶坐标下降法(DCA)和交替方向乘子法(ADMM)提出了一种改进的随机变量的交替方向乘子法重建优化方法。在原始ADMM方法的基础上,增加了一个随机更新规则,在每次迭代中只需要一个或者几个样本,就可加速收敛,使目标函数快速得到最优解,从
罗兰C系统受原子钟以及经典无线电信号测量精度的影响,难以为用户提供高精度授时。提出了一种基于杂化微波-光纠缠的罗兰C系统授时方案,通过腔电光力转换器制备纠缠微波-光信号,并利用纠缠信号的二阶相干函数得到信号传播时间,根据授时时序关系修正用户本地钟时刻并完成授时。仿真分析了腔电光力转换器的参数对授时精度的影响。所提方案在理论上实现了对罗兰C系统授时精度的提高,在抗压制干扰、欺骗干扰等方面都具有一定优势。
The use of a new thallium-ion (Tl^( )) source for glass optical power splitter fabrication based on a NaNO_(3^(-)) Tl_(2)SO_(4) mixture is proposed and demonstrated. Planar optical power splitters were made using glassessuch as K_(6), K_(8), K_(9). The op