【摘 要】
：
Using both numerical and experimental methods,we studied the effect of coil configuration of pulsed magneto-oscillation (PMO) on distribution of electromagnetic field,flow field and solidification structure with the same pulse current parameters in Al ing
【机 构】
：
Department of Mechanical and Electrical Engineering,Tangshan University, Tangshan 063000, China;Stat
论文部分内容阅读
Using both numerical and experimental methods,we studied the effect of coil configuration of pulsed magneto-oscillation (PMO) on distribution of electromagnetic field,flow field and solidification structure with the same pulse current parameters in Al ingots.We designed and constructed three types of coils:surface pulsed magneto-oscillation,hot-top pulsed magneto-oscillation (HPMO) and combined pulsed magneto-oscillation (CPMO).PMO treatment refined the solidification structure in all the ingots.The configuration of the PMO,however,introduced differences in magnetic field intensity,electromagnetic force,Joule heat,flow field,equiaxed grain zone,grain size and growth direction of columnar grains.The largest equiaxed grain zone was found in CPMO treated ingot,and the smallest grain size was found in both HPMO and CPMO treated ingots.Numerical simulation indicated that difference in electromagnetic field and flow field resulted in differences in solidification structure.HPMO is more advantageous over others for large ingot production.
其他文献
In this paper,electron backscatter diffraction and various other characterization and analysis techniques including X-ray diffraction,electron channeling contrast imaging and energy-dispersive spectrometry were jointly employed to investigate microstructu
Modified electrically assisted (EA) rapid heating of Al-Si-coated hot stamping steel is suggested,and the intermetallic evolution in the coating during heating is experimentally investigated.In the modified EA rapid heating,a continuous electric current f
In this study,AlTiN coatings were deposited on YT14 cemented carbide balls by arc ion plating technique.The friction and wear behavior of the AlTiN-coated balls against SKD11 hardened steel was investigated by sliding tests using a ball-ondisk tribometer
The high-temperature molten carbonate fuel cell is an ultra-clean and highly efficient power generator.It is operated at ～ 550-650 ℃,which is considered optimal in facilitating fast fuel cell reaction kinetics,utilizing waste heat efficiently,and allowing
Advanced characterization techniques are utilized to investigate the effect of laser surface treatment on microstructural evolution of pure titanium (Ti).The results show that there are three distinctly different types of microstructure from surface to su
To investigate the influence of tantalum content on high-temperature mechanical properties of low-carbon reduced activation ferritic/martensitic (RAFM) steels,RAFM steels containing different tantalum contents (0 and 0.073％) were fabricated,and the tensil
During the slab continuous casting process,the flow field of molten steel in the mold plays a decisive role in the quality of the slab.In this paper,electromagnetic swirling flow in nozzle technology is proposed to control the flow field in mold.This tech
M718 alloy with an extra high Mo content of 7.50 wt％ which reduced Nb addition and increased Al and Ti additions within the composition specifications of 718 alloy has been designed to increase the service temperature of 718 alloy.And the effect of the he
As a typical configuration in plastic deformations,dislocation arrays possess a large variation of the separation of the partial dislocation pairs in face-centered cubic (fcc) metals.This can be manifested conveniently by an effective stacking fault energ
A modified cellular automaton model is developed to depict the interface evolution inside the cementite plus ferrite lamellar microstructures during the reaustenitization of a pearlite steel.In this model,migrations of both the austeniteferrite and austen