论文部分内容阅读
1.经常检查蓄电池加液盖上的小孔是否畅通。该孔若堵塞,蓄电池充电时产生的氢气和氧气排不出去,会将其外壳撑裂。 2.保持蓄电池外表清洁,以免外溢的电解液或其它杂质将蓄电池正负极连通,导致蓄电池自行放电。 3.经常检查电解液液面高度。没有标志线的蓄电池,其电解液液面距极板10～15mm为宜。若高度不足,应及时补加蒸馏水;若是因电解液外溢引起,应补加电解液。
1. Always check the battery plus liquid hole on the lid is smooth. If the hole is blocked, the hydrogen and oxygen generated when the battery is charged will not go out and will crack the shell. 2. Keep the battery clean appearance, so as to avoid spilling electrolyte or other impurities will be connected to the positive and negative battery, causing the battery to discharge itself. 3. Regularly check the electrolyte level. No signs of the battery, the electrolyte level from the plate 10 ~ 15mm is appropriate. If the height is insufficient, the distilled water should be supplemented in time; if it is caused by electrolyte overflow, electrolyte should be added.