【摘 要】
：
The nonuniform sampling method in hologram plane is proposed to reconstruct objects on multi-plane simultaneously. The hologram is nonuniformly sampled by decomposing it into several parts with various sampling rates. The hologram is calculated based on t
【出 处】
：
ChineseOpticsLetters
论文部分内容阅读
The nonuniform sampling method in hologram plane is proposed to reconstruct objects on multi-plane simultaneously. The hologram is nonuniformly sampled by decomposing it into several parts with various sampling rates. The hologram is calculated based on the nonuniform fast Fourier transform (NUFFT) algorithm. In the experiment, we load this nonuniformly sampled hologram on phases-only spatial light modulator (SLM), and by illumination with collimated light objects with different sampling rates are reconstructed at different distant planes simultaneously. Both of the numerically simulation and optical experiments are performed to demonstrate the feasibility of our method. The experiment also shows that our proposed nonuniform sampled hologram for multi-plane objects is calculated by only one step, better than conventional method that needs several steps of calculation proportional to the numbers of object planes.
其他文献
对相位移测量技术中的条纹强度量化所引起的相位误差进行了定量研究。给出了相位测量误差与条纹强度误差之间的统计关系式，对条纹强度量化误差进行傅里叶级数展开，并利用条纹强度与相位的关系求得该级数的系数，进而得到标准Ｎ幅算法的相位的解析表达式。最后对强度量化误差效应的一些影响因素进行了讨论。
采用波导布拉格光栅(WBG)微扰的傅里叶变换和流守恒定律求解耦合模方程,得到WBG相位响应的解析解。通过对该相位响应的解析解进行微分,建立了WBG时延谱的半解析型通解。基于该时延谱通解,仿真分析了均匀和线性啁啾WBG的时延谱,并与用其他方法得到的时延谱及其实测谱进行对比分析,以验证时延谱通解的分析精度和效率。对比结果表明,基于该时延谱通解的分析结果在整个反射带内与用其他方法得到的时延谱计算值及实测值一致。该时延谱通解可用于快速、精确分析任意复杂WBG的时延谱,对有解析型和离散型傅里叶变换的WBG分别具有<
分析了投影栅相位法三维轮廓测量系统的非线性误差。建立了几何光学模型, 从理论上推导出被测点的相对高度与像点坐标的关系,研究了系统结构参数改变引起的高度误差的变化。详细阐述了像点坐标误差和系统非线性误差对系统精度的影响, 并给出了高度误差补偿方法。据此提出修正的非线性高度拟合公式, 实验结果证明新拟合公式的优越性。
重点介绍了声光开关与光脉冲单选器的基本工作原理, 设计了一种以声光开关为核心器件的小型化高速脉冲单选器, 该脉冲单选器具有消光比高、插入损耗低、性能稳定和结构小等特点, 可用于从锁模激光器输出光脉冲串中选取单个光脉冲作为前端系统的种子光源。
为了响应里根总统关于将国家实验室技术向工业界转移的号召，桑迪亚国家实验室和激光技术公司已签定了一项开发激光切割修补可行性研究的协议。
通过水浴合成方法简易快速地在铜片基底上合成氧化铜纳米片阵列,10 min反应时间下合成的氧化铜纳米片阵列具有最高的初始放电比容量(629.1 mA·h·g -1)以及良好的循环特性(100次循环后仍保留初始容量的79.6%)。该阵列结构有效地解决了传统块体氧化铜材料作为锂离子电池负极材料在充电中体积膨胀的问题,同时缩短了锂离子在氧化铜晶格内的扩散距离,提高了氧化铜材料的比容量和氧化铜作为负极材料的性能。
非制冷红外焦平面阵列(UFPA)不可避免地存在无效像元, 这对UFPA的成像效果造成了极坏的影响。为解决这一问题, 在分析并总结各种非制冷红外焦平面无效像元识别算法优缺点的基础上, 提出一种新的无效像元识别与实时补偿方法。根据像元响应特性, 采用循环迭代法以搜索最优的无效像元判别阈值, 并据此标识出无效像元的位置。在硬件实现阶段, 对于M×N的UFPA器件, 在任意采样时刻, 利用移位寄存器保存当前采样点之前的M个响应值, 使其输出可实时更新为与采样点同列的上一个数据; 同时, 利用一般的寄存器实时保存与
Inorganic quantum dots (QDs) have excellent optical properties, such as high fluorescence intensity, excellent photostability and tunable emission wavelength, etc., facilitating them to be used as labels and probes for bioimaging. In this study, CdSe@ZnS
An efficient surface-enhanced Raman scattering (SERS) substrate is developed based on silver nanoparticles decorated anodic aluminum oxide (Ag/AAO). The AAO templates were fabricated using a two-step anodization approach, and silver nanoparticles (AgNPs)