论文部分内容阅读
久保田PRO481/488收割机上的割刀采用了双曲柄驱动结构,该机构具有振动小、工作平稳、噪音小等特点。但是,由于割刀的使用环境比较恶劣,因此用户需要按照如下的要求对割刀进行日常的点检及调整。 1.机器的使用说明书上要求每100小时调整一次,但如每周调整一次(30-50小时)的话,使用寿命会延长,另外,割刀周围的泥土清除和碎稻杆、杂草等每天应清扫。 2.使用每30-50小时将割刀从机器上拆下,分解并清扫。将留在刀片上变硬的
Kubota PRO481 / 488 cutter on the harvester with dual crank drive structure, the mechanism has a small vibration, smooth work, low noise and so on. However, due to the harsh environment of the cutter, the user needs to check and adjust the cutter regularly according to the following requirements. 1. The manual of the machine is required to be adjusted every 100 hours. However, if the machine is adjusted once a week (30-50 hours), the service life will be extended. In addition, the soil around the cutter will be cleared and the straw, weeds and the like will be removed daily Should be cleaned. 2. Use the knife every 30-50 hours removed from the machine, decomposition and cleaning. Will stay hardened on the blade