【摘 要】
:
Compression creep tests of a Ti-48%Al (mole fraction) alloy were carried out at 1150K with soft-orientated PST crystal. Parallel twinning took placed uring the
【机 构】
:
Department of Material Science
论文部分内容阅读
Compression creep tests of a Ti-48%Al (mole fraction) alloy were carried out at 1150K with soft-orientated PST crystal. Parallel twinning took placed uring the creep. Changes in lamellar microstructure caused by the parallel twinning were investigated, and their effects on creep deformation behavior were disc ussed. The results show that the parallel twinning occurs in an early stage of creep, and makes significant contribution to creep strain in the domains favorably oriented for the twinning. The nucleation of parallel twins finishes at a strain of about 3%. There is a critical resolved shear stress for parallel twinning, and it is about 50 Mpa in the Ti-48%Al PST crystals at 1150K. The activity of parallel twinning increases with increasing applied stress or in a coarse lamellar mater ial. The addition of parallel twins reduces the average value of lamellar spacin g. In general, the refinement of lamellar structure should improve creep resistance. However the strengthening by parallel twinning is not evident in creep of the soft PST crystals because the soft deformation modes are the dominant deformation mode in the crystals.
其他文献
It is observed by scanning tunneling microscopy (STM) that the adsorbed Benzotriazole (BTA) on copper is long in shape and has an irregular rectangle. The growt
Phase analysis for the coated surface with B4C and Y2O3 of cemented carbid e WC-20Co in vacuum-heating was carried out by high-temperature X-ray diffra ction fr
Materials such as Koch AH - 70, basalt aggregate, limestone powder and graphite particles were used to prepare conductive asphalt concrete, which is a new type
保护乡土地种植蔬菜的生产前景非常广阔,其利用合理的土地栽培将会有一个很大的发展空间。
Effects of different sintering temperature and sintering time on the relative density of the sintered compacts were studied to obtain the optimal sintering para
实验分别对慈竹及龙须草进行了低污染制浆探讨。结果表明,慈竹制浆比较理想的工艺条件为NaOH用量20%(NaOH计),Na2SO3用量3%(NaOH计),试验室自制无硫助剂用量0.1%,液比1︰3;龙须
MoSx coatings were prepared by bipolar-pulse DC unbalanced magnetron-sputtering system with the variation of coating thickness at different Ar pressures. The co
The corrosion resistance of 2024 Al and SiC particle reinforced 2024 Al metal matrix composite (SiCp/2024Al MMC)in 3.5% NaCl solution was investigated with elec
The three dimensional solidification simulation of the single crystal investment castings at withdrawal rates of 2 mm/min, 4.5 mm/min and 7 mm/min was performed