这里介绍一种普通车床上车削精确锥度时校准车床小刀架角度的方法: 如图所示:在车床的花盘上或在卡盘的端面上安装一个90°弯板,并转动主轴使弯板的A面垂直于机床床面。按照小刀架的角度盘将小刀架调整到所需角度的近似位置,并初步固定住。按所加工锥度的锥面长度向后移动小刀架,不包括小刀架 Here is an example of how to calibrate the lathe angle of a lathe when turning a precise taper on an ordinary lathe: As shown in the figure: Install a 90 ° bent plate on the faceplate of the lathe or on the end face of the chuck, and turn the spindle so that the A surface perpendicular to the machine bed. In accordance with the angle of the knife holder plate knife holder adjusted to the desired angle of the approximate location, and initially fixed. According to the length of the tapered taper machined to move the holder, not including the holder