我部一辆解放CA1091型汽车,因撞车损坏而送修,修理后作使用,发现转向十分沉重,而且左右转向角不相同,汽车行驶右转时,明显感到右转向角比正常值小一半。 对转向器进行保养、装复后使用,无效果;更换新转向器,故障依旧。经仔细的外观检查,发现在前车轮位置摆正时,转向器的转向垂臂不垂直,约向后偏斜20°左右。与同类车作测量比较,它的前桥与转向器之问的相对距离要比其他车大18cm,因此,当转向垂臂 I liberated a car CA1091 type, due to damage and repair crashes for repair, use and found that the steering is very heavy, and about the steering angle is not the same, the car driving right turn, the right steering angle was clearly less than half the normal value. The steering gear for maintenance, installed after use, no effect; replacement of the new steering gear, the fault still. After careful examination of the appearance, found that when the front wheel position is adjusted, steering steering arm vertical, about backward deflection of about 20 °. Compared with the measurement of similar vehicles, its front axle and the steering gear asked relative distance 18cm larger than other cars, so when the steering arm