电解加工是电化学加工法中最基本和最重要的一种,它是利用金属的阳极溶解作用来加工金属的。所有的电化学加工法都使用了导电性的工具作为阴极,被加工另件(工件)作为阳极,在两极之间的间隙中通过电解液,并在两极加上直流电压,使直流电通过,由于金属表面产生的阳极溶解作用而去除金属,因此,也可以认为电化学加工法是广义的电解加工。 Electrolytic machining is the most basic electrochemical processing method and the most important one, it is the use of metal anodic dissolution to process the metal. All of the electrochemical processes use conductive tools as the cathodes and work pieces (workpieces) as the anodes. The electrolyte passes through the gap between the two poles and a DC voltage is applied across the poles to allow the direct current to pass. As a result of Since the metal surface is subjected to anodic dissolution to remove the metal, it is also considered that electrochemical processing is a broad electrolytic processing.