Microstructure and formation mechanism of in-situ TiC-TiB2/Fe composite coating

来源 :中国有色金属学会会刊(英文版) | 被引量 : 0次 | 上传用户:wanwan1985
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Steel matrix composite coatings locally reinforced with in situ TiC-TiB2 particulates were prepared by argon arc cladding(AAC) with different mass fractions of Fe and Ti+B4C powders as the binding materials. The microstructure, micro-hardness and wear resistance were investigated using SEM, XRD, Micro-hardness Tester, and Friction and Wear Tester, respectively. The results show that the main phases of coating are TiC, TiB2 and α-Fe. The excellent metallurgical bonding is formed between the composite coating and substrate. The coating is uniform, continuous and almost defect-free and the particles are dispersively distributed in the cladded coating. Moreover, the formation mechanism was investigated. With the increase of the content of TiC+TiB2, the micro-hardness and wear resistance are also improved at the room temperature under normal atmosphere conditions.
其他文献
目的对按照《中国药典》2010年版方法标定的氢氧化钠滴定液浓度进行不确定度评定。方法通过不确定来源分析,建立滴定液不确定度的数学模型,对标定过程中各种影响因素进行分析
采用混凝沉淀工艺对城市二级出水回用于火电厂循环冷却水系统进行深度处理,仅对浊度和CODCr有较好的去除,但出水中有机物和氨氮仍未达到火电厂循环冷却水系统的要求.为此,考
The properties of the passivation film formed on 316L stainless steel were studied by Electrochemical Impedance Spectroscopy(EIS),Mott-Schottky and Voltammetry
Tensile tests of solid solution treated 7050 aluminum alloy were conducted to different strain degrees (0.1, 0.4, 0.6 and failure) at 460 ℃ with the strain rat
A novel heat substrate technique,high frequency inductive heat deposition(IHD),was introduced to coat porous carbon materials,C/C and carbon felt to improve the
By ring test and bend test,the improvement of waste tire rubber particles on the crack-resistance and flexural behaviors of cement-based materials were investig
To find the optimal routing is always an important topic in wireless sensor networks (WSNs). Considering a WSN where the nodes have limited energy, we propose a
伴随着全球经济的加速发展和工业的规模急剧膨胀,环境问题已经越来月凸显。为了更好的在发展经济的同时,不至于对环境产生较大的影响,进而危及子孙后代的生存,目前各国都已经建立
Surfactants and builders ale the two most important ingredients in laundry,household and personal-care cleaning products.They play a key role in washing process
The dynamic recrystallization(DRX)behavior of Nb-Ti microalloyed steels was investigated by isothermal single compression tests in the temperature range of 900-