切列波维茨基冶金厂生产薄板和带钢的冷轧车间是由2800/1700半连轧机供应热轧带钢(坯料)。这台轧机的粗轧机组是由立式除鳞机,2800/二辊机架和2800四辊机架组成,在粗轧机上加热到1250～1270℃(在四段连续加热炉内)的板坯,以六道(每座平辊机架各三道)轧成23毫米的坯料。精轧机组由六架1700四辊机架组成,在该组机架上得到厚2～4.5毫米 The hot-rolled strip (blank) is supplied by the 2800/1700 semi-tandem mill at the Cherepovetskiy Metallurgical Plant for the production of sheet and strip cold-rolling plants. The roughing mill of this mill is composed of a vertical descaler, a 2800 / two-roll stand and a 2800 four-roll stand, and is heated on a roughing mill to a plate at 1250-1270C (in a four-stage continuous heating furnace) Blank, with six (each flat roller rack three) rolled into 23 mm blank. The finishing unit is made up of six 1700 four-roll stands with a thickness of 2 to 4.5 mm