水牛角质地坚硬,加工困难,一般多采用刨床刨,铡刀铡或锯成粉等办法,但刨床刨片厚,难于煎出有效成分,铡刀铡工效低,锯成粗粉煎服不方便。近二年来,我们采用了用小型圆盘切药机加工刨片,效果较好。方法是:先将水牛角浸泡一周后,捞起,将脏物刷洗干净,再将水牛角夹在虎钳上,用钢锯将水牛角从角尖到角梢锯成四块(锯粉留用),放入切药机送料槽内,用一木条顶住水 Buffalo horns are hard and difficult to process. Generally, planers are used for planing, boring knife boring or sawing, etc. However, the thickness of the planer fins is too thick to be effective for frying. The boring knife boring work efficiency is low, and sawing into coarse meal is not convenient. In the past two years, we have used a small-disc plucking machine to machine the fins, which has a good effect. The method is: first buffalo horn soaked for a week, picked up, scrub the dirt clean, and then the buffalo horn clip on the vise, with a hacksaw to saw the buffalo horn from the tip to the corner tip into four pieces (saw powder retention ) Put it in the feed slot of the cutting machine and use a wooden strip to hold the water