【摘 要】
：
Four pilot-scale Vertical Flow Constructed Wetlands (VFCWs) filled with gravel and planted with Phragmites australis were operated for seven months in the field to study the efficiency of arsenic removal in contaminated wastewater.The average arsenic remo
【机 构】
：
State Key Laboratory of Freshwater Ecology and Biotechnology,Institute of Hydrobiology,Chinese Acade
论文部分内容阅读
Four pilot-scale Vertical Flow Constructed Wetlands (VFCWs) filled with gravel and planted with Phragmites australis were operated for seven months in the field to study the efficiency of arsenic removal in contaminated wastewater.The average arsenic removal efficiency by the VFCWs was 52.0％±20.2％,52.9％±21.3％,and 40.3％±19.4％ at the theoretical concentrations of 50 μg/L(CW50),100 μg/L (CW100),and 500 μg/L (CW500) arsenic in the wastewater,respectively.The results also showed no significant differences in the removal efficiency for conventional contaminants(nitrogen,phosphorus,or chemical oxygen demand) between wastewater treatments that did or did not contain arsenic (P＞0.05),except for phosphorus in CW500.The highest average monthly removal rate of arsenic occurred in August (55.9％-74.5％) and the lowest in November (7.8％-15.5％).The arsenic removal efficiency of each VFCW was positively correlated with temperature (P ＜ 0.05).Arsenic accumulated in both substrates and plants,with greater accumulation associated with increased arsenic concentrations in the influent.The maximum accumulated arsenic concentrations in the substrates and plants at the end of the experiment were 4.47 mg/kg and 281.9 mg/kg,respectively,both present in CW500.The translocation factor (TF) of arsenic in the reeds was less than 1,with most of the arsenic accumulating in the roots.The arsenic mass balance indicated that substrate accumulation contributed most to arsenic removal (19.9％-30.4％),with lower levels in plants (3.8％-9.5％).In summary,VFCWs are effective for the treatment of arsenic-containing wastewater.
其他文献
The addition of nano zero-valent iron (nZVI) is a promising technology for the in situ remediation of soil.Unfortunately,the mobility and,consequently,the reactivity of nZVI particles in contaminated areas decrease due to their rapid aggregation.In this s
A redundantly actuated parallel manipulator(RAPM) with mixed translational and rotational degrees of freedom (DOFs) is challenged for its dimensionally homogeneous Jacobian modeling and optimal design of architecture.In this paper,a means to achieve redun
Reclaimed water has been widely applied in irrigation and industrial production.Revealing the behavior of emerging contaminants in the production process of reclaimed water is the first prerequisite for developing relevant water quality standards.This stu
Herein,nitrogen and sulfur co-doped carbon nanotubes (NS-CNT) adsorbents were synthesized via the chemical vapor deposition technique at 1000℃ by employing the camphor,urea and sulfur trioxide pyridine.In this study,desulfurization of two types of mercapt
Filled skutterudite is currently one of the most promising intermediate-temperature thermoelectric (TE) materials,having good thermoelectric transport performance and excellent mechanical properties.For the preparation of high-efficiency filled skutterudi
In our previous studies,several papermaking sludge-based flocculants (PSBFs) were synthesized from wood pulp papermaking sludge.The structure-activity relationships of the PSBFs have been investigated in simulated dye wastewater treatment,but their effici
High-efficiency and cost-effective catalysts with available strategies for persulfate (PS) activation are critical for the complete mineralization of organic contaminants in the environmental remediation and protection fields.A nanoscale zero-valent iron-
Although the torso plays an important role in the movement coordination and versatile locomotion of mammals,the structural design and neuromechanical control of a bionic torso have not been fully addressed.In this paper,a parallel mechanism is designed as
Taping is often used to protect patterned wafers and reduce fragmentation during backgrinding of silicon wafers.Grinding experiments using coarse and fine resin-bond diamond grinding wheels were performed on silicon wafers with tapes of different thicknes
This paper proposes a novel method for the continuum topology optimization of transient vibration problem with maximum dynamic response constraint.An aggregated index in the form of an integral function is presented to cope with the maximum response const