论文部分内容阅读
1.开机过程中出现“死机”。此时能听到硬盘自检声,但看不到屏幕显示,或在开机自检时发出鸣叫声但计算机不工作。可检查计算机各连接线,特别是主机和显示器间连接是否松动;然后按“Delete”键查看计算机BIOS系统设置,如果自己对BIOS设置不熟悉,可请专业人士对BIOS的内存设置参数、硬盘存取模式等重新设定,也可自己进入BIOS后用Load BIOS Default Setup选项启动和恢复原厂商的最安全状态设置,重新开机后可能就解决了。 2.退出操作系统时出现“死机”。这可能与Windows95操作设定和驱动程序的设定不当有关。Windows95在退出系统或返回DOS状态时都会关
1. boot process “crash.” At this point you can hear the hard disk self-test sound, but can not see the screen, or in the POST self-alarm but the computer does not work. You can check the computer cables, especially the connection between the host and the monitor is loose; then press the “Delete” key to view the computer BIOS system settings, if you are not familiar with the BIOS settings, you can ask professionals to set the parameters of the BIOS memory, hard disk storage Take the mode and so on reset, also may enter the BIOS after oneself uses the Load BIOS Default Setup option to start and restore the original manufacturer’s most secure condition establishment, after reopening the machine may solve. 2. “Crashes” when exiting the operating system. This may be related to the Windows 95 operating settings and driver settings. Windows95 will exit when exiting the system or returning to DOS state