论文部分内容阅读
菲斯特转子秤因其喂料稳定、精度高、密封性能好的特点而在水泥企业有较广泛的应用,其中介绍菲斯特煤粉转子秤的文献很多,但对其生料转子秤的介绍很少。本文将对这两者在应用上的区别进行介绍。1工艺布置对比两种秤的工艺布置分别见图1和图2。生料由均化库底称重仓卸出后,经过气动流量阀进入转子秤内,随转子一起转动,到传感器的位置处被称量,然后到出料口靠重力作用落入下端的空气输送斜槽中被输送走(见图1),即生料料流由上往下经过转子秤。而煤粉转子秤出料口向上,料流由上落
Fest rotor balance because of its stable feeding, high precision, good sealing performance and more widely used in cement companies, which introduced a lot of literature on Fest powdered coal rotor scales, but its raw material rotor scale Little introduction. This article will introduce the differences between these two applications. A comparison of process layout The two kinds of scale process layout are shown in Figure 1 and Figure 2, respectively. The raw material is discharged from the weighing warehouse at the end of the homogenization tank and then enters the rotor scale through the pneumatic flow valve and rotates together with the rotor to be weighed to the position of the sensor and then to the lower end of the air outlet Chute is transported away (see Figure 1), that raw material flow through the rotor from top to bottom scale. The pulverized coal atomizer discharge port upward, the flow from the up and down