Cryorolling相关论文
研究了深冷轧制(?100°C,?190°C)和热轧(400°C)并随后在160°C时效不同时间的Al-Cu-Li合金带材的力学性能和显微组织.通过透射电......
采用5道次累积叠轧制备超细晶粒1060铝合金带材,并对材料分别进行三道次冷轧(298 K)、深冷轧制(轧制温度为83 K和173 K).采用透射......
Fabrication and Characterization of High-Bonding-Strength Al/Ti/Al-Laminated Composites via Cryoroll
Sandwich-like Al/Ti/Al-laminated composites have many advantages such as low density and high specific strength with val......
详细研究冷轧前退火和固溶处理对1100铝合金初始组织的形成、纳米至微米级组织的形成以及力学性能和腐蚀性能的影响.在50％深冷轧前,......
Microstructures and impact toughness behavior of Al 5083 alloy processed by cryorolling and afterwar
The influence of rolling at liquid nitrogen temperature and annealing on the microstructure and mechanical properties of......
Microstructure and mechanical properties of cryorolled AZ31 magnesium alloy sheets with different in
AZ31 magnesium alloy sheets with different strong textures were cryorolled at the liquid-nitrogen temperature to the str......
The objectives of this study were to produce ultrafine-grained(UFG) AA2024 aluminum alloy by cryorolling followed by agi......
为了开发超高强度铝合金和评估各种强化机制对合金屈服强度的影响，将Al-4%Cu-3%TiB2进行低温轧制，然后再在175°C下快速退火、在125......
对Fe-Ni-Co（Fe-32.5%Ni-3.72%Co）合金进行了不同压下量的深冷轧制,利用光学显微镜、XRD等分析手段研究了合金的低温变形过程中的组织......
为了开发超高强度铝合金和评估各种强化机制对合金屈服强度的影响，将Al-4%Cu-3%TiB2进行低温轧制，然后再在175℃下快速退火、在125℃......
研究深冷轧制、室温轧制和后续退火对6082铝合金析出相、显微组织演变(回复，再结晶与晶粒生长)、力学性能和腐蚀行为的影响。采用差......
分别采用低温轧制和常温轧制技术制备高强高导Cu−0.5Cr(质量分数,%)合金。研究Cu−0.5Cr合金经低温轧制/常温轧制和时效处理后的......
Microstructures and impact toughness behavior of Al 5083 alloy processed by cryorolling and afterwar
The influence of rolling at liquid nitrogen temperature and annealing on the microstructure and mechanical properties of......
The objectives of this study were to produce ultrafine-grained (UFG) AA2024 aluminum alloy by cryorolling followed by ag......
利用透射电子显微镜观察(TEM)、电子背散射衍射(EBSD)技术、硬度测试、拉伸测试与电导率测试研究室温轧制与深冷轧制Cu-0.2wt.%Mg......
