【摘 要】
：
In the process of curved surfaces polishing and buffing,the tools have to be compressed on the surface and moved to wear the work piece,so the normal force and the tangential feed motions should be co
【机 构】
：
Faculty of Mechanical Engineering and Mechanics Ningbo University,Ningbo 315-211 China
【出 处】
：
2013先进智能制造技术发展研讨会
论文部分内容阅读
In the process of curved surfaces polishing and buffing,the tools have to be compressed on the surface and moved to wear the work piece,so the normal force and the tangential feed motions should be controlled synchronously.It is a typical kind of compliant control,generally,which would most likely be done under the hybrid motion/force control policy.Although its theory is already perfect well,it could seldom be used in the process of curved surfaces polishing and buffing,if ever,for it is always not easy to orthogonalize the force control space from the motion control space.In this paper,an independent force controlling system is developed and added to control the normal force---a CNC lathe for aspheric surfaces polishing and buffing.The normal force control space is orthogonalized from the motion control space by geometry defining and further orthogonalizing in the domain of time is taken to make the force not to be interpolated with the displacements of the feed motions.Force controlling experiments and polishing experiments show that the hybrid motion/force control policy could be used in the process of aspheric surfaces polishing and buffing by providing normal force control and feed motions control independently.
其他文献
现有空调系统的风道送风管道与回风管道单独架设,需要分别在墙体上进行打孔,占据很大空间.本文提出假设,将两种管道整合在一起,以减少一次打孔,节省空间,达到建筑节能的效果.通过设计计算,并经过试验验证此假设的可行性.
室内半挥发性有机物(SVOC)对人体健康危害极大,由于其易被颗粒物吸附,后者的存在会影响SVOC在空间中的传质过程,使室内SVOC浓度升高.在此前研究的基础上,本文考虑非均匀颗粒物场对SVOC传质的影响,完善颗粒物和SVOC在空间中的传质模型.对Benning测定颗粒物吸附DEHP平衡系数的实验进行模拟,指出:实验中颗粒物先集中分布在散发室中心,后逐渐运动到边缘;散发室两侧壁面附近颗粒相DEHP浓
针对脉冲电弧焊的焊接特点,提出了六个表征参量来评价焊接过程稳定性的优劣即峰值时间、基值时间、周期时间、峰值时间段内焊接电流平均值、基值时间段内焊接电流平均值、一个周期时间段内焊接电流平均值,可任意选取其中一个参量作为样本,对其进行标准差和变异系数分析,进而判断焊接过程稳定性.并在此基础上确定了周期时间和峰值时间段内焊接电流平均值的标准差和变异系数最能直接有效的反映和评价焊接过程稳定性.为验证该评价
The structures associated with welding process are commonly found in various industrial applications due to technical and economic reasons.In this study,a structure design problem having the character
There is a debate about whether the gray level of coaxial keyhole image reflects keyhole depth and weld penetration or not in the coaxial vision sensing of laser welding.For continuous wave Nd:YAG las
Address high dynamic characteristics of high speed Corrugating roll mechanism,the establishment of a corresponding mathematical model of the upper and lower Corrugating roller height,introduced a corr
针对现有的智能照明控制系统的可视化控制界面中无法实时直观了解被控房间的照明效果,本文提出利用Web3D技术建立可以与用户交互的LED照明仿真平台,将LED照明仿真平台与现场LED照明控制系统进行集成,达到现场与监控的双向通信,实现LED照明系统控制与仿真的一体化,进而提高LED控制系统智能化、自动化、数字化程度,有效减少室内人工照明能耗.本文LED照明控制系统通过无线传感器网络来建立底层网络,实现
In this paper,the laser sensor is using to detect environmental information.The problems of maps building of mobile robot are researched in the indoor structured environment.Least squares algorithm is
With the development of remanufacturing technology,electrochemical machining (ECM) is increasingly used to repair shaft parts.The flow field of gap and the electric field is the main factor affecting
The exit of venture capital include the selection and exit time.This paper introduces the idea of the welfare economics to establish a model to analyze the manner in which to maximize the social welfa