【摘 要】
:
Background, Motivation and Objective Surface transverse wave (STW) resonators on quartz provide excellent Q-factors and low loss in 2GHz frequency range [1].Meanwhile, the transverse modes were observ
【机 构】
:
GVR Trade SA, Switzerland Uppsala University, Swe
论文部分内容阅读
Background, Motivation and Objective Surface transverse wave (STW) resonators on quartz provide excellent Q-factors and low loss in 2GHz frequency range [1].Meanwhile, the transverse modes were observed unusually situated on the left side from the main resonance, which was explained by concave form of the slowness curve in plane of substrate [2].Moreover, propagation along the busbars can, probably, radically change the acoustic field distribution across the aperture and introduce additional perturbation in 2-port resonator/filter performance [2].These effects can manifest themselves as notches and other perturbations of the narrow band 2-port resonator performance, which can be unacceptable for the device applications [3].In this presentation we analyze, using COMSOL simulations, the dependences of transverse modes on aperture, electrodes metal thickness and metallization and compare the results to experimental data.
其他文献
Background, Motivation and Objective The singular value decomposition (SVD) has been applied to analyze the dispersion of propagating multimode signals in cortical bone (Minonzio et al., JASA, 127(5),
Background, Motivation and Objective Ultrafast imaging based on coherent plane-wave compounding is one of the most important recent developments in medical ultrasound.It significantly improves image q
Background, Motivation and Objective Perturbations in the boundary conditions of Surface Acoustic Wave (SAW) devices are typically quantified through the use of frequency-domain methods, where the dev
Background, Motivation and ObjectiveNon-destructive evaluation (NDE) combined with signal processing techniques helps to evaluate complex damage patterns in materials, especially when they remaininvis
Background, Motivation and Objective The ability of confining an acoustic wave in an ultrasmall region of sub-wavelength dimensions can extend phonons lifetime, break the diffraction limit and enhance
Background, Motivation and Objective In picosecond laser ultrasonics ultra-short laser pulses are used both for the generation and detection of the acoustic pulses with a typical length from 100 nm do
Background, Motivation and Objective Ultrasound imaging in thin materials is hindered by the overlapping wavefronts due to shorter time-of-flight inside the media than the time support of the emitted
Background, Motivation and Objective Piezoelectric ultrasonic motors are well-known as the most prominent micromotors for actuating miniature devices that can help minimally invasive diagnoses and tre
Background, Motivation and Objective Pneumatic actuators have potential to downsize because they have simple structure.However many control devices that can control pneumatic actuators continuously ar
Background, Motivation and Objective In many industrial fields, a spraying of coating materials with a low flow rate is expected for the coating quality improvement.When the flow rate of the spraying