Study on Calibration of Secondary Air Injection System in a V12 Engine

来源 :2016中国汽车工程学会年会 | 被引量 : 0次 | 上传用户:sun200208
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
  The emission regulation of CHINA 6 is going to be issued,the limits of the emissions will be greatly strict.The utilization of secondary air injection system is proved to be one of the effective methods to reduce the CO and THC emissions in the phase of cold engine.The application of secondary air system in the process of the V12 engine developing,the control strategy,the result of calibrationand the diagnostic calibration are introduced,according to the development experience.It's a reference to the engineers who face the similar issue.
其他文献
本文采用HTCC工艺制备了NOx传感器片芯,研究了烧结工艺中升温速率、峰值烧结温度、峰值保温时间和烧结气氛对传感器氧泵电极性能的影响.结果表明,在排胶阶段采用空气烧结,设
通过正交试验法研究了丝网印制工艺中各参数对氮氧化物传感器电极厚度的影响.结果表明当刮刀压力为3.5kg、刮印角度65°、刮印速度15cm/s、丝印网距0.5mm时,电极厚度为9.65μ
在严格的排放法规下,选择性催化反应(Selective Catalytic Reduction,SCR)已经成为减少柴油机NOX排放的标准方法.尿素-水溶液的喷射以及与混合器表面和发动机尾气的相互作用
会议
对汽车行驶工况路线确定、数据采集、构建流程进行了论述,基于主成分分析及K-means聚类分析,构建出西安市市区城市客车瞬态行驶工况(XATD-HBUS).分析了XATD-HBUS工况及ECE工
本文针对车用片式氮氧化物传感器片芯制备的温等静压工艺参数进行研究.利用光学显微镜检测片芯腔室端面形状;万能实验机测试片芯机械强度;微反配气系统对片芯进行气敏性能测
在对西安市市区城市客车瞬态工况研究的基础上,基于已得到的短行程划分与聚类分析结果,采用多目标优化对模态10工况模型求解,合成出西安市市区城市客车模态行驶工况(XA-Mode1
本文开发了柴油机废气再循环流量和进气总流量的实时模型,实现了电子控制单元中对实时EGR率的计算,EGR率控制采用双层闭环控制算法,第一层闭环控制通过实时EGR率反馈控制,输
  This article analyzedcabin indoor VOCs emission of more than 400 vehicles in attainment rate,average concentration and distribution situation.
会议
采用浸渍法制备了Ce/Cu-Beta和Cu-Ce/Beta两种改性分子筛催化剂,并对其理化特性及SCR反应活性进行了表征.尽管两种催化剂都含有相同Cu、Ce金属元素,但是由于引入方式的不同,
  An integrated DPF filtration model is proposed to study the properties of soot filtration and pressure drop,which includes deep bed filtration model,cake fi
会议