在核对钢筋料单时,有时发现钢筋的下料长度没有考虑弯曲调整值。究其原因,主要是由于部分翻样的技术员对弯曲调整值这个概念不理解甚至不清楚造成的。所谓弯曲调整值,是钢筋按图实际尺寸与中心轴线长度之间的差值。由于钢筋应按中心轴线长度下料,而配筋图上注明 When checking the reinforcing material list, it is sometimes found that the length of the reinforcing material does not take into account the bending adjustment value. The reason is mainly due to the fact that part of the technicians who turned the sample did not understand or even know the concept of bend adjustment value. The so-called bending adjustment value is the difference between the actual dimensions of the steel according to the figure and the length of the central axis. As the reinforcement should be cut along the length of the central axis, while reinforcing bar marked