论文部分内容阅读
ЮДЕК公司的灌装机构灌装机构(图11)是根据瓶内和箱内液面上方的真空程度使液体装瓶的。它由两个部件组成,带升降器的活动灌装卡盘和带管咀的空气管。由于滚柱沿凸轮轮廊面的滑动,可使与卡盘连接的升降器升起和降落。灌装机构的圆筒在导向套上移动。导向套借助于成型的橡皮圈安装在接收箱的底部。因筒下部拧有使瓶子对空气管定心的定心锥,空气管上端插入箱内液体上方
The filling mechanism of ЮДЕК’s filling unit (Figure 11) bottoms liquid according to the degree of vacuum above and below the liquid level in the tank. It consists of two parts, a movable filling chuck with lifter and an air tube with a nozzle. Due to the sliding motion of the rollers along the cam surfaces, the lifters connected to the chuck can be raised and lowered. The barrel of the filling mechanism moves on the guide sleeve. The guide sleeve is attached to the bottom of the receiving box by means of a molded rubber band. Due to the lower part of the tube screwed to the center of the air tube on the bottle centering cone, the upper end of the air tube into the box above the liquid