论文部分内容阅读
在机械加工等许多行业中,都要使用三维坐标架,一些从国外引进的设备中虽然附带坐标架,但容易损坏且不易修复,若单独从国外购买,不易买到且价格昂贵。国产三维坐标架结构有不合理之处,使用不便。因此自制了简单实用的三维坐标架,效果良好。 坐标架结构示意图如图所示。 底座1中间有一个沿x方向的通槽,滑块9在通槽中滑动。底座1上表面有一个沿x方向的V形槽,其中放置导向杆8。滑板7
In many industries such as machining, the use of three-dimensional coordinate frame, some introduced from abroad, although the equipment attached to the coordinate frame, but easy to damage and not easy to repair, if purchased separately from abroad, not easy to buy and expensive. Domestic three-dimensional coordinate frame structure has unreasonable place, inconvenient to use. So made a simple and practical three-dimensional coordinate frame, the effect is good. Coordinate frame structure diagram as shown. In the middle of the base 1 there is a through slot in the x direction, in which the slider 9 slides. The upper surface of the base 1 has a V-shaped groove along the x direction, in which the guide rod 8 is placed. Skateboard 7