笔者采用电炉加热法代替酒精加热法切制参类药材，现介绍如下。选择一个直径大于所使用的电炉约0．5～1cm，高度为25～30cm的圆铁桶（桶底用铁钉打孔，密布孔洞，形如筛网状），罩在电炉上,将药材均匀分布于铁桶的筛孔面上．接通电源，加热2～5min后，待药材软化乘热切制即可。 I use the electric furnace heating method to replace the alcohol heating method to cut the reference medicine, is introduced as follows. Select a round iron drum with a diameter of more than 0.5 to 1 cm and a height of 25 to 30 cm (the bottom of the barrel is punched with iron nails, with a hole in the shape of a cloth, shaped like a mesh), and cover the electric furnace. Evenly distributed on the mesh surface of the iron bucket. Turn on the power, heat 2 ~ 5min, until the medicine can be softened and cut by heat.