两种不同结构共聚酯对脂肪酶降解反应的对比

来源 :塑料 | 被引量 : 0次 | 上传用户:huangtongfeng
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
采用两种酸一种醇和两种醇一种酸分别对PBS改性,合成了不同化学结构的共聚酯PBSA和PBSH,并在磷酸缓冲液中以它们为底物,研究了对脂肪酶N435降解反应的异同。采用质量损失率和GPC评价了降解前后共聚物分子质量的变化;WAXD和TG分析了酶降解前后共聚物结晶度和热性质的变化;POM对降解后的材料进行了形貌观测。研究结果表明:相比PBS,PBSA和PBSH对脂肪酶的感受性有很大提高,24 h后降解率分别达到90%和60%以上,并且PBSA降解速率比PBSH快很多;降解后2种共聚物相对分子质量变化不大,但分子量分布系数变宽;结晶度增大;降解3 d后PBSA的热稳定性降低,而PBSH的热稳定性提高。 Two kinds of acid and one kind of alcohol and two kinds of alcohol and one kind of acid were respectively used to modify PBS to synthesize copolyesters PBSA and PBSH with different chemical structures. Using phosphate buffer as substrate, the lipase N435 The similarities and differences of degradation reaction. The mass loss rate and GPC were used to evaluate the molecular weight of the copolymer before and after degradation. WAXD and TG were used to analyze the changes of crystallinity and thermal properties of the copolymer before and after degradation. POM was used to observe the morphology of the degraded material. The results showed that compared with PBS, PBSA and PBSH greatly increased the susceptibility to lipase, and the degradation rates reached 90% and 60% respectively after 24 h, and the degradation rate of PBSA was much faster than that of PBSH. After degradation, the two copolymers The relative molecular mass changed little, but the molecular weight distribution coefficient broadened; the crystallinity increased; the thermal stability of PBSA decreased after 3 d of degradation, but the thermal stability of PBSH increased.
其他文献
以日常用品给排水管为研究对象,建立描述塑料管材挤出成型过程的理论模型,基于Polyflow软件,首次对管材传统口模和气辅口模挤出成型过程分别进行了二维等温数值模拟分析.研究
目的探讨体素内不相干运动(IVIM)与动脉自旋标记(ASL)MRI评估早期移植肾功能的价值。方法前瞻性收集2014年5月至2015年12月天津市第一中心医院行异体肾移植术后2~4周的76例患者。移植肾功能良好组,44例,eGFR≥60 ml·min-1·1.73 m-2;移植肾功能轻中度受损组,19例,30 ml·min-1·1.73 m-2≤eGFR<60 ml·min-1·1.73 m-2;移
Rural drinking water safety is a growing conc in China. This study investigated the health risk of pollution of groundwater for the drinking water supply in Min
期刊
目的探讨DWI评估射波刀治疗肝细胞癌疗效的价值。方法回顾性分析2011年2月至2013年12月解放军总医院第五医学中心临床诊断为肝细胞癌的90例肝细胞癌患者(95个病灶)。90例患者于治疗前、46例患者于治疗后3个月、49例患者于治疗后6个月行肝脏MRI平扫及动态增强扫描。按照实体肿瘤效果评价标准确定肿瘤完全坏死病灶及术后残留活性病变。测量肿瘤完全坏死的病灶、残留活性组织病灶和正常肝组织ADC值。
针对塑料玩具产品在生产中装配效率低的问题,基于知识Petri网模型,提出了一种实现塑料玩具产品装配序列优化的方法.分析塑料玩具产品特点并建立知识规则库对层次连接关系图进
目的探讨基于多期CT定量影像组学特征筛选鉴别透明细胞型肾细胞癌(ccRCC)与乏脂肪性血管平滑肌脂肪瘤(fpAML)的CT优势扫描期相及构建最佳分类模型。方法回顾性收集2014年1月至2018年9月195例经病理证实的ccRCC(n=131)及fpAML(n=64)患者的术前CT平扫及动态多期增强扫描(皮髓质期、肾实质期、排泄期)资料,采用ITK-SNAP软件在病灶最大径层面手工勾画ROI后对其进
Wetlands are an important source of natural resources upon which rural economies depend. They have increasingly been valuable for their goods and services, and
利用磁控溅射方法以CH4和Ar的混合放电气体溅射单晶Ge靶制备碳化锗(Ge1-xCx)薄膜,通过XPS、Raman和Nanoindentation等表征手段系统地研究了射频功率和衬底温度对所获薄膜成分、