Ce3+doped BaLu2Al2Ga2SiO12- A novel blue-light excitable cyan-emitting phosphor with ultra-high quan

来源 :稀土学报(英文版) | 被引量 : 0次 | 上传用户:ghosty
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
It is well known that cyan-emitting phosphors play a very important role in full-spectrum white LEDs. A large number of cyan-emitting phosphors have been reported in the past few years, however, most of them can only be effectively excited by near-ultraviolet light. There are very few cyan-emitting phos-phors that can be intensively excited by blue light (440 and 470 nm). Here, a novel blue-light excitable cyan-emitting phosphor BaLu1.95Ce0.05Al2Ga2SiO12 with excellent performance is reported. The cyan phosphor has a cubic structure in space group Ia3d with a = 1.205379(3) nm, which can be easily ob-tained through a solid-state reaction pathway. The emission peak of the cyan phosphor is located at 500 nm and its internal quantum efficiency is as high as 90.01%when excited at 455 nm at 25 °C. The cyan phosphor exhibits superior resistance against thermal quenching of luminescence, and its intensity at 125 °C is as strong as 92.14% of the intensity at room temperature. Meanwhile, it also shows an outstanding resistance against water, where its luminescence intensity is hardly changed after being immersed in pure water for 528 h. The white LED lamp prepared by employing the obtained BaLu1.95-Ce0.05Al2Ga2SiO12 as cyan phosphor displays remarkable optical properties with CCT=4441 K, Ra=93.7, CRI = 90.4 and CIE 1931 (x, y) as (x = 0.3648, y = 0.3752). The experimental results demonstrate that BaLu1.95Ce0.05Al2Ga2SiO12 is a promising cyan-emitting phosphor with great application potential in full-spectrum white LEDs.
其他文献
Binary nanocrystalline rare-earth hexaboride is regarded as one of the promising optical absorption materials that possess the high transparency for visible light and the strong absorption for NIR due to the effects of localized surface plasmon resonance.
针对集团用户市场业务的发展,采用DTMB技术,实现了集团用户高清数字电视的传输。提出基于动态负载均衡的数字电视系统优化算法,从连接方式、恢复模式、性能分配等3个方面,克服了集团用户业务中断、流量不均、恢复时间长等的缺点。
铅作为高炉原料中的一种微量元素,在高炉内循环富集会对高炉冶炼产生一系列不利影响。为了明确PbO对原燃料冶金性能的影响,通过气相吸附法制备不同铅含量的烧结矿、球团矿和焦炭样品,采用扫描电子显微镜对反应前后的富铅样品进行微观分析,研究富铅后原燃料冶金性能的变化。结果表明,铅以PbO的形式吸附在烧结矿、球团矿和焦炭的表面和孔隙中;PbO对烧结矿和球团矿还原以及焦炭的气化反应起到一定的催化作用,当表面吸附的铅含量较高时,会降低其催化作用,但对焦炭反应后强度影响不大。
在护炉阶段,炉缸活性受到一定的影响,活跃炉缸是高炉生产操作的核心工作。分析了影响炉缸活性的主要因素,并通过稳定焦炭质量、上下部调剂获得合适的两道气流,保持充沛的炉温和合适的渣碱度,优化出铁组织,保持合适的钛负荷等技术措施活跃炉缸,使得炉缸工作状况好转,炉缸炭砖温度高点逐步下降至可控范围,经济技术指标得以适当恢复,实现了炉役后期高炉的安全生产和技术指标的回升。
With the rapid development of the Internet of vehicles(IoV),vehicle to everything(V2X)has strict requirements for ultra-reliable and low latency communications(URLLC),and massive multiinput multi-output(MIMO)channel state information(CSI)feedback can effe
采用SEM、EDS、TEM等技术,结合热力学软件,研究Ti含量对低合金耐磨钢低温冲击韧性的影响、断口夹杂物尺寸和形态以及夹杂物形态与冲击韧性的关系。结果表明,Ti元素质量分数为0.03%的低合金耐磨钢的低温(-40℃)冲击性能最好,可达33.0 J;断口夹杂物TiN的形态呈现3种形貌,即出现细窄裂纹、出现孔洞以及直接被撕裂;随着Ti含量的增加,夹杂物形态由完整到破碎。分析TiN的破碎机制发现,TiN破碎由2种机制产生,即裂纹扩展形成孔洞导致破碎、主裂纹衍生出更多的次裂纹导致破碎。
泥炮是高炉的专用设备,其主要功能是在不休风情况下完成高炉堵住铁口,使高炉快速进入下一循环的作业,高炉泥炮控制连杆频繁失效,给高炉正常生产带来极大的负面影响。分析了河钢股份有限公司承德分公司4座高炉泥炮控制连杆故障率偏高、制约高炉长周期稳定运行的问题。结合现场实际情况,制作一种新型泥炮控制连杆支座,该支座结构简单、造价低廉,可延长高炉泥炮控制连杆及关节轴承使用寿命,降低成本,为河钢股份有限公司承德分公司年创造效益269.16万元。
Recently,in the researches on vehicular Internet-of-Things(IoT),platooning have received lots of attentions due to its potential to improve the fuel efficiency and driving experience.Platoon is a group of vehicles that act as smart agents,they travel coll
Intermetallic compounds based on rare-earth metals and iron are by far the most promising materials for permanent magnets. In this work, the multicomponent comp
通过采集现场过程数据,从温度、成分、相变、晶粒形貌、轧制变形应力等方面对低合金钢Q355B宽规格钢板在热连轧过程中产生边部横向裂纹缺陷的原因进行机理分析。结果表明,宽规格低合金钢边部横向裂纹产生原因与板坯宽度方向温度均匀性相关,边部局部温度过低导致两相区和非再结晶区域轧制,边裂区晶粒度尺寸和形貌与正常区有明显差异,从而导致轧制过程表层和次表层伸长率不一致,高温下局部金属拉伸变形抗力超过抗拉强度,导致了表面横向裂纹缺陷的产生。