论文部分内容阅读
按原电炉出厂说明书规定,仪表控制柜在炉子的一侧如下图。但在实际生产中证明这样的安装方法不好,特别是盐炉,由于盐炉变压器的干扰,对仪表的正常工作影响很大。按电子电位差计使用说明规定:安装仪表的附近,不应有产生强磁场的设备(如变压器、电动机等),以免影响工作。我厂按电炉出厂说明书规定进行安装的电盐炉,控温仪表的温度指针上下跳动误差一般均在20～30℃范围内,严重
According to the original factory instructions, the instrument control cabinet in the side of the stove as shown below. However, in actual production proved that this installation is not good, especially salt furnace, due to the interference of salt furnace transformer, the normal work of the instrument a great impact. By electronic potentiometer Instructions for use states: near the installation of the instrument, there should be no strong magnetic field generating equipment (such as transformers, motors, etc.), so as not to affect the work. I plant according to the electric furnace factory instructions for the installation of the salt furnace, temperature control instrument temperature pointer up and down beating error are generally in the range of 20 ~ 30 ℃, serious