论文部分内容阅读
Surface Modification of Natural Fibrous Brucite with Stearic Acid
【机 构】
:
School of Earth and Space Sciences, Peking University, Beijing 100871, China
【出 处】
:
武汉理工大学学报(材料科学版)(英文版)
【发表日期】
:
2016年1期
其他文献
Kubelka-Munk Revised Theory for High Solar Reflectance and High Long-wave Emissivity Coatings Design
Effect of Carrier Liquid on Electrorheological Performance and Stability of Oxalate Group-modified T
By using oxalate group-modified TiO2 nanoparticles as the dispersing phase, different kinds of silicone oil with various viscosities and terminal groups (hydroxyl, hydrogen, and methyl) were used as the dispersing media to prepare different electrorheolog
The changes of resistivity of conductive asphalt concrete at different temperatures were studied, and positive temperature coefficient (PTC) model was established to estimate the influence of temperature on the resistivity quantitatively, which eliminated
Characterization of Stress Concentration by Tangential Component Hp(x) of Metal Magnetic Memory Sign
The correlation between the stress concentration and the spontaneous magnetic signals of metal magnetic memory (MMM) was investigated via tensile tests. Sheet specimens of the Q235 steel were machined into standard bars with rectangular holes to obtain va
Corrosion behavior of 300M in neutral corrosion environments containing NaCl simulated by total immersion (TI), salt spraying (SS) and periodic immersion (PI), was investigated by surface analysis techniques, corrosion weight-loss method, and electrochemi
As secondary mineral resources, diatomite tailings (DT) got from the Linjiang region of China were prepared and characterized by SEM, XRF and XRD. Mono-factor experiments were carried out to investigate the effects of the operation factor, including conta
Detection of Thermophysical Properties for High Strength Concrete after Exposure to High Temperature
Solvothermal Synthesis and Electrochemical Properties of Octahedral Cobalt Oxide Decorated with Ag2O
Octahedral CoO with nanostructures decorated with Ag nanoparticles was prepared via a facile solvothermal approach.After being annealed at 500 ℃ for 1 h,an electrochemical capacitor material of Co3O4 decorated with Ag2O was obtained.The cyclic voltammetry
Poly(2,5-benzimidazole)/TriSilanolPhenyl POSS Composite Membranes for Intermediate Temperature PEM F
Novel organic-inorganic composites were in-situ synthesized by using TriSilanolPhenyl polyhedral oligomeric silsesquioxane (SO-POSS) as fillers and poly(2,5-benzimidazole) (ABPBI) as polymer matrix. The uniformly dispersed 3% SO-POSS particles in ABPBI ma
Phase Evolution Study and Optimization of the Heat Treatment Process for High Current Capacity Bi-22
Powder in tube process (PIT) was adopted for the fabrication of single filament Bi-2223 tapes, and a heat treatment process including the first heat treatment (HT1), intermediate rolling (IR), and second heat treatment (HT2) was performed. The phase evolu