A SiC w/Al composite was fabricated through a squeeze cast route and cold rolled to about 30%, 50% and 70% reduction in thickness, respectively. The length of whiskers in the composite before and after rolling was examined using SEM. Some of the rolled composites were annealed by recrystallizing to remove the work hardening of the matrix alloy. The hardness of the rolled and annealed SiC w/Al composites was examined and then associated with the change of the whisker length and the work hardening of the matrix alloy. It was found that the hardness was a function of the degree of cold rolling. For the cold rolled composites, with the increase in the degree of cold rolling, the hardness increases at first, and decreases when the degree of cold rolling exceeds 50%. For the annealed ones, however, the hardness decreases monotonously with the increase in rolling degree. The different changes in hardness between the rolled and annealed composites could be attributed to a result of the competition between the work hardening of the matrix resulting from the cold rolling and the work softening arising from the change of whisker length. A length of whiskers in the composite before and after rolling was examined using SEM. Some of a SiC w / Al composite was fabricated through a squeeze cast route and cold rolled to about 30%, 50% and 70% reduction in thickness, respectively. the rolled composites were annealed by recrystallizing to remove the work hardening of the matrix alloy. The hardness of the rolled and annealed SiC w / Al composites was examined and then associated with the change of the whisker length and the work hardening of the matrix alloy. For the cold rolled composites, with the increase in the degree of cold rolling, the hardness increases at first, and decreased when the degree of cold rolling exceeds 50%. For the annealed ones, however, the hardness decreases monotonously with the increase in rolling degree. The different changes in hardness between the rolled and annealed composites could be attributed to a result of the compe tition between the work hardening of the matrix resulting from the cold rolling and the work softening arising from the change of whisker length.