论文部分内容阅读
经多次试验,我们研制出一种电解抛光溶液,它可使α钛合金(包括工业纯钛)试样得到光亮无痕的表面。其配方如下: 乙醇4份:高氯酸1份;冰醋酸0.5份。电解抛光规范阴极:钛板;电压:40～45V(电流不必考虑);时间:10～15秒。操作方法:将电路接通,调整好电压。试样做为阳极。阳极与阴极的距离约为10～20mm。在电解抛光过程中,试样表面的温度逐渐升高,一
After many trials, we developed an electrolytic polishing solution that gives bright, non-marking surfaces on alpha titanium alloys including industrial grade titanium. The formula is as follows: 4 parts of ethanol: 1 part perchloric acid; 0.5 part of glacial acetic acid. Electrolytic polished cathode: Titanium; Voltage: 40 ~ 45V (current need not be considered); Time: 10 ~ 15 seconds. Method of operation: the circuit connected to adjust the voltage. Sample as an anode. The distance between anode and cathode is about 10 ~ 20mm. In the electrolytic polishing process, the sample surface temperature gradually increased, one