有关滚丝板齿纹的制造,曾先后在本刊的三卷三期与三卷九期有过两次报道。但我厂对于滚丝板的加工方法,于所刊载者均有所不同。笔老抱着经验交流互相学习的态度,故不厌其繁,述之如下,以供同志们参考。我厂制造滚丝板的齿纹,也是在牛头创床上刨制的,但所用刀具为圆形样板刨刀,形状如 Regarding the manufacture of the thread rolling pattern, it has twice been reported twice in three volumes and three volumes in this issue. However, our factory for the processing of rolling plate, in the published are different. The old pen holding the exchange of experiences and learning from each other’s attitude, so tired of its complicated, described below, for the comrades for reference. I plant rolling thread profile, but also in the Tau Tau bed planing, but the tool used for circular model planer, the shape of such as