Si-Al-Ir Oxidation Resistant Coating for Carbon/Carbon Composites by Slurry Dipping

来源 :材料科学技术学报(英文版) | 被引量 : 0次 | 上传用户:jzg8888
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
A Si-Al-Ir oxidation resistant coating was prepared for SiC coated carbon/carbon composites by slurry dipping.The phase composition, microstructure and oxidation resistance of the as-prepared Si-Al-Ir coating were studied by XRD (X-ray diffraction), SEM (scanning electron microscopy), and isothermal oxidation test at 1773 K in air, respectively.The surface of the as-prepared Si-Al-Ir coating was dense and the thickness was approximately 100/μm.Its anti-oxidation property was superior to that of the inner SiC coating.The weight loss of SiC/Si-Al-Ir coated carbon/carbon composites was less than 5 wt.pct after oxidation at 1773 K in air for 79 h.The local oxidation defects in the coating may result in the failure of the SiC/Si-Al-Ir coating.
其他文献
The amenability of a refractory ore to the extraction of gold and silver by cyanide leaching was investigated. Diagnostic leaching tests were also performed to
The isothermal oxidation behavior of a Ti3Al-based alloy (Ti-24Al-14Nb-3V-0.5Mo-0.3Si, molar fraction, %) at 700- 1 000 ℃ in air was investigated. The oxidatio
The separation techniques of vanadium and molybdenum were summarized, and a new method of removal V(Ⅴ) from Mo(Ⅵ) by adsorption with chelate resin was present
Numerical control(NC) bending experiments with different process parameters were carried out for 5052O aluminum alloy tubes with outer diameter of 70 mm, wall t
Ceramic LaNiO3 samples were prepared by solid state reaction method at different sintering temperatures. It was found that the resultant was not ABO3 perovskite
In recent times, conventional materials are replaced by metal matrix composites (MMCs) due to their high specific strength and modulus.Strength reliability, one
The alloys were prepared in Mg-rich corner of Mg-Zn-Ce system. Partial phase equilibrium relationships of these alloys at 350 ℃ were identified by using scanni
The novel felt-metal supported PVA composite hydrophilic ultrafiltration membrane was used for the treatment of oil/water(O/W) emulsion. The effects of transmem
Laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) has been widely adopted for the direct multi-elemental analysis with high sensitivity.Es
The nonstoichiometric β-SiC powders were synthesized via combustion reaction of Si and C system in a 0.1 MPa nitrogen atmosphere, using Teflon as the chemical