论文部分内容阅读
一、取可乐瓶一只,用钢锯截去瓶口,再将瓶底在热水中稍浸一会,乘热拉去底座。按图一切割成车身。二、另取一只可乐瓶,剪一片20厘米×8.5厘米的瓶片作顶篷(图二),再剪一条26厘米长的瓶片跨在前轮两侧作支撑(图三),然后粘上顶篷。三、用小电珠作车灯。车灯与车头的连接,靠一只汽水瓶盖压平后剪插而成。四、用四只塑料瓶盖作轮子(或用泡沫塑料片切成)。轮子的外侧各贴上从一号废电池取下的铜帽和塑料顶片。然后用铁丝串连而成。
First, take a coke bottle, cut the bottle with a hacksaw, and then the bottom of the bottle in the hot water for a little dip, heat to the base. According to figure cut into a car body. Second, another take a Coke bottle, cut a piece of 20 cm × 8.5 cm bottle for the top canopy (Figure 2), and then cut a 26 cm long bottle across the front wheel to support both sides (Figure 3), and then Stick to the roof. Third, with small beads for the lights. Headlights and headlights connected by a soda bottle cap flat cut into. Fourth, with four plastic bottle cover for the wheel (or cut with foam sheet). The outer sides of the wheels are each affixed with a copper cap and a plastic top sheet removed from Waste Battery One. Then made of iron wire.