论文部分内容阅读
In this work,the morphologies of weld of 7075-T6 aluminum alloy via friction stir welding(FSW) were analyzed by optical microscopy,the temperature field was attained by numerical simulation,and the effect of temperature on material transfer behavior in the thermal-mechanical affected zone(TMAZ) at different stages was mainly investigated.The FSW process consists of three stages.It is very interesting to find that the maximum transfer displacement of material appears at the final stage of welding process,then at the stable stage and at the initial stage,which results from the difference of peak temperatures at different stages.At any stage,the material in TMAZ near the surface of weld transfers downwards,the material in the middle of weld moves upwards and the material near the bottom of weld hardly moves.In any cross section of weld,the largest transfer displacement of material appears in the middle of weld.The increase of rotational velocity and the decrease of welding speed are both beneficial to the transfer displacement of material in the middle of weld.
In this work, the morphologies of weld of 7075-T6 aluminum alloy via friction stir welding (FSW) were analyzed by optical microscopy, the temperature field was attained by numerical simulation, and the effect of temperature on material transfer behavior in the thermal-mechanical affected zone (TMAZ) at different stages was mainly investigated. The FSW process consists of three stages. It is very interesting to find that the maximum transfer displacement of material appears at the final stage of welding process, then at the stable stage and at the initial results, the results from the difference of peak temperatures at different stages. At any stage, the material in TMAZ near the surface of weld transfers downwards, the material in the middle of weld moves upwards and the material near the bottom of .In any cross section of weld, the largest transfer displacement of material appears in the middle of weld. The increase of rotational velocity and the decrease of welding speed are both beneficial to the transfer displacement of material in the middle of weld.