【摘 要】
：
Selective Laser Melting(SLM),one of the metal additive manufacturing methods in the powder bed,is frequently used in the pro-duction of 316L stainless steel bio
【机 构】
：
Erzurum Technical University,Faculty of Engineering and Architecture,Department of Mechanical Engine
论文部分内容阅读
Selective Laser Melting(SLM),one of the metal additive manufacturing methods in the powder bed,is frequently used in the pro-duction of 316L stainless steel biomaterial.In this study,the effect of duplex surface modification(metal additive manufacturing and plasma oxidizing)on the corrosion resistance of 316L was investigated.Ti6A14V layer was formed by additive manufacturing on 316L produced by selective laser melting method.The obtained layered Ti6A14V/316L samples were oxidized by plasma at 650℃-750℃and l h-4 h parameter conditions.TiO2 ceramic layer was formed on the Ti6A14V/316L structure by plasma oxidation process in several layer thicknesses.Corrosion properties of the TiO2 layer were determined by Open Circuit Potential(OCP),potentiodynamic polarization,and Electrochemical Impedance Spectroscopy(EIS)tests in Simulated Body Fluid(SBF)solution.Also,the surface characterizations of the samples were determined by the Vickers micro-hardness tester,Scanning Electron Microscopy(SEM),and X-Ray Diffractometer(XRD)analysis.From the results,it was obtained that the corrosion resistance of the plasma oxidized was higher than the untreated 316L and layered Ti6 A14V/316L samples.The best corrosion resistance was obtained under the 750℃and 4 h parameter conditions because of the increasing plasma oxidizing time and temperature.
其他文献
Micro-textured surfaces have improved the tribological performance of contact surfaces under lubricated conditions;however,not practiced due to manufacturing challenges.In addition to simpler micro-pits or straight-trench type textures,sophisticated bioin
报道了Cs0.05FA0.79MA0.16PbI2.52Br0.48钙钛矿薄膜的变温光致发光特性。采用一步旋涂法,用氯苯作反溶剂制备了Cs0.05FA0.79MA0.16PbI2.52Br0.48钙钛矿薄膜,并对其表面形貌和结晶质量进行了表征。X射线衍射(XRD)分析结果表明其为四方钙钛矿
本文通过分析一个课后习题分析了两个随机变量不独立,但它们的平方独立的奇妙现象,发现两种不同类型的联合密度函数具有这种特性,给出了一个一般性的定理且进行了证明.最后,实例验证了此定理.
During the Late Cretaceous in the Eastern Mediterranean, the northern branch of the southern Neotethys was closed by multiple northward subductions. Of these, the most northerly located subduction created the Baskil continental arc at around 82–84 Ma. The
以γ-氨丙基三乙氧基硅烷和水杨醛为原料,通过席夫碱反应合成一类硅烷基Schiff碱亚胺配体;分别以六水氯化镍和六水氯化钴为络合试剂,通过络合反应合成两类硅烷基Schiff碱亚胺
基于密度泛函理论和分子动力学分别研究了油酸咪唑啉(C17)、季铵化改性咪唑啉(QI)和环氧乙烷改性咪唑啉(EOI)的反应活性、吸附方式、吸附强度和最优吸附构型,揭示了3种缓蚀剂的缓蚀机理.结果表明:3种缓蚀剂分子的反应活性区域主要分布在咪唑环、头基的N原子以及苯环上;3种缓蚀剂分子的缓蚀能力大小为QI>EOI>C17;根据缓蚀剂与金属成键原子态密度可知,咪唑环中N原子的s轨道和p轨道与Cu原子的d轨道发生杂化耦合,形成化学键.本文评价了3种咪唑啉类缓蚀剂的缓蚀性能,明确了咪唑啉类缓蚀剂的缓蚀机
本文通过因式分解法分析了积分∫+∞/01/1+xndx(n≥2)的求解.证明了该积分可以表示为π-x/sinx在一些特殊点函数值的线性组合.最后,本文给出了几个例子对该方法进行了验证.
The Jingren deposit is part of the Qimantage metallogenic belt within the eastern Kunlun orogenic belt,the largest metallogenic belt in Qinghai Province,northwe
本文给出X为离散分布或连续分布时不同情况下数据的x2拟合优度检验.
In the past decades,many materials have been studied as carriers for targeted drug delivery.However,there is a need for utilizable and selective carrier materials with few side effects.Here,the magnetic Ganoderma Lucidum Spores(mGLS)as a highly efficient