Transmission line realization of subwavelength resonator formed by a pair of conventional and LHM sl

来源 :浙江大学学报A(英文版) | 被引量 : 0次 | 上传用户:sunjian
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
In this paper, the authors present the transmission line (TL) realization of one-dimensional subwavelength resonator formed by a pair of conventional right-handed material (RHM) and left-handed material (LHM). In such resonator, a novel resonant mode with the resonant frequency depending on the length ratio of the RH/LH TL sections occurs as a consequence of the full phase compensation due to the backward wave in the LH TL section. The theoretical circuit-model analyses are supported by simulation and experimental evidence on resonators with different RH/LH length ratios.
其他文献
ZnFe2O4-based inert anodes were made to conduct the aluminum electrolysis tests. The corrosion behaviors of the inert anodes were examined and discussed. Experi
A 2D woven graphite fibers reinforced aluminum matrix composite with 50%Grf (volume fraction) was fabricated by the squeeze-casting technology, and its microstr
In Nb-Si based alloys with a two-phase NbSS/ intermetallic Nb5Si3 structure, the Nb5Si3 provides high-temperature strength, while the Nb solid-solution phase, N
The formation mechanism of bulge on the works surface during the extrusion process was analyzed. The bulges size and the reasons for abscission were studied. Th
30%Al2O3p/Al-Cu-2.0Mg composite and Al2O3p/Al-Cu-2.5Mg composite with 0.3 μm-Al2O3 particles were fabricated.Age-hardening behaviors of two composites and the
The technology of length-alterable line-scanning laser sintering was introduced. Based on the research of laser heating property,powder thermal physics paramete
Based on initial discontinuity state (IDS) of material, a preliminary analytical model was presented to evaluate the effect of interaction of pitting corrosion
A kind of aluminum cooler was manufactured by means of vacuum brazing technique, and the cooler was examined by hydraulic pressure test. The result indicates th
The titanium dioxide sols were synthesized with tetrabutyl titanate as precursor,diethanolamine(DEA) as complexing agent ,polyethylene glycol (PEG) as organic t
Half-metallic Fe3O4 films prepared by DC magnetron reactive sputtering with a tantalum(Ta) buffer layer was investigated. Primary emphasis is placed on the stru