我厂用于清洗成品轴承的清洗机,原采用固定式笼头系统,如图1所示。清洗液从管道喷嘴射出,冲洗工件表面,以达到清洗目的。1.原笼头系统存在的问题由喷嘴射出的清洗液在清洗区方向不变,清洗液和工件表面的接触区较小,清洗效果差,且喷嘴易堵塞;同时又因喷嘴数量多,需供给大量清洗介质,使清洗能耗和清洗机占地面积加大。2.改进后的滚筒式清洗器(1)结构简图及工作原理.如图2所 I used to clean the finished bearing factory cleaning machine, the original fixed-head system, shown in Figure 1. Rinsing fluid from the nozzle nozzle, flushing the workpiece surface, in order to achieve the purpose of cleaning. 1. The problem of the original carrier system The cleaning fluid ejected by the nozzle is unchanged in the direction of the cleaning zone. The contact area between the cleaning fluid and the workpiece surface is small. The cleaning effect is poor and the nozzle is easy to block. Meanwhile, due to the large number of nozzles, A large number of cleaning media, cleaning and washing machine to increase the area. 2. Improved drum cleaner (1) Schematic diagram and working principle, as shown in Figure 2