801磷铁泥浆是目前比较理想的一种筑炉材料,此材料砌筑的盐炉、炉龄在三年以上,效果较好。成份及配制 A组份氟化钙(5～10％)、三氧化二铝(20～30％),二氧化硅(50～60％),三氧化二铁(5～10％); B组份铸铁粉; C组份稀释剂磷酸。三组份的比例:A:B:C=4:1:4 混合时先将一份B组份放入准备好的缸或塑料容器里(不能用铁容器),再放入四份C组份,搅拌一下,然后再放入四份A组份,搅拌均匀,停留20～30分钟,待反应停止后,便可使用。阴雨天时空气潮湿,可适当多加一点B或A组份。注意事项用801泥浆砌炉,注意一定要采用经过1300℃焙烧的高铝砖,并且此砖一定要干燥(不能被水浸泡或雨 801 Phosphorus iron mud is an ideal material for building furnaces. The salt furnace masonry is more than three years old and works well. Composition and preparation A component calcium fluoride (5-10%), aluminum oxide (20-30%), silica (50-60%) and ferric oxide (5-10% Cast iron powder; C component diluent phosphoric acid. The proportions of the three components: A: B: C = 4: 1: 4 When mixing, put a component B into a prepared cylinder or plastic container (iron container can not be used) Stir, and then add four parts A component, stir, stay 20 to 30 minutes, until the reaction is stopped, you can use. Humid wet weather, may be appropriate to add a little B or A component. Matters needing attention With 801 mud masonry furnace, be sure to pay attention to the use of high alumina brick calcined at 1300 ℃, and this brick must be dry (can not be soaked in water or rain