论文部分内容阅读
遵照伟大领袖毛主席“要节约闹革命”的教导,我们利用我厂的产品有利条件,花费很少的劳动和材料,制成了简易的浇口杯造型机,很受铸造车间师傅们的欢迎,解决了生产问题。浇口杯造型机的秸构如图所示。机架用80×80×8的角钢制成,在机架中用螺栓固定造型机的工作缸。工作缸是车辆上的203×305制动缸部件。为使压盖在开合时不与砂箱碰撞,在工作台右方以固定端为圆心,沿杯套中心线焊一个30毫米宽12毫米厚90度的月牙板。在砂箱的上部,离工作台下平面2毫米处,焊四个5毫米厚的揩
Following the teachings of Chairman Mao, the great leader, “To save the revolution,” we made use of the favorable conditions of our products and the labor and materials that we have spent so little to make simple pour cup molding machines that are very popular with the foundry workshop masters. , To solve the production problem. The structure of the gate cup molding machine as shown. Rack with 80 × 80 × 8 angle made of bolts in the frame with the molding machine cylinder. The working cylinder is a 203 × 305 brake cylinder unit on the vehicle. In order to ensure that the gland does not collide with the flask during opening and closing, a fixed 30 mm circle of 90 mm wide, 30 mm wide and 12 mm thick is welded along the centerline of the cup at the right side of the table. In the upper part of the flask, two millimeters (5 mm) thick 焊 are welded 2 mm from the lower table