【摘 要】
：
The correlation between crystal rotation and redundant shear strain in rolled single crystals was investigated by using the crystal plasticity finite element (CPFE) model in this paper.The deformation in aluminium single crystals of four representative or
【机 构】
：
School of Mechanical, Materials and Mechatronic Engineering, University of Wollongong, Wollongong,NS
论文部分内容阅读
The correlation between crystal rotation and redundant shear strain in rolled single crystals was investigated by using the crystal plasticity finite element (CPFE) model in this paper.The deformation in aluminium single crystals of four representative orientations (rotated-Cube,Goss,Copper,and Brass) after rolling and plain strain compression was simulated,and the predictions have been validated by the experimental observations.In the rotated-Cube and Goss,the redundant shear strain and crystal rotation were in the same pattern,alternating along the thickness,while the relation between them was not obvious for the Copper and Brass due to their asymmetrical distributions of activated slip systems.The relations between slip system activation,crystal rotation,and shear strain were investigated based on the CPFE model,and the correlation between shear strain and crystal rotation has been built.
其他文献
The effect of phosphorus on the precipitations of γ“,γ\'and δ phases and associated tensile properties in IN718C alloy are investigated in this study.It is revealed that P atoms are dissolved in the grain interior to a relatively high degree and hence i
In order to study the influence of the physical state of solder on the interfacial reaction of dip-soldered Sn-3.0Ag-0.5Cu/Cu system,two kinds of experiments were designed,including:(1) solid-state aging between the solder and Cu substrate;(2) liquid-stat
Direct laser metal deposition is a kind of advanced rapid manufacturing technology,which can produce near net shape parts by depositing metal powders layer by layer.This study demonstrates fabrication,the anisotropy of mechanical properties and hardness o
The influences of pin offset on the formation,microstructure and mechanical properties of friction stir welded joint of Ti6A14V and AZ31B Mg dissimilar alloys were investigated.The results show that sound joints are obtained at different offsets.With the
The microstructures and corrosion behavior of AlSi5Cu 1Mg alloy modified with different contents of La were investigated.Optical microscopy observations showed that the microstructures of AlSi5Cu 1Mg-xLa (x =0,0.3,0.6,and 0.9 wt％) alloy transformed from c
With the aim of improving corrosion resistance of rod cladding for in-service and accident conditions,six new zirconium alloys (named N1-N6) have been designed.The contents of Sn and Nb were optimized for better behavior at high-temperature pressurized wa
In the present study,creep activation energy for rupture was obtained as 221-348 kJ/mol for 22Cr15Ni3.5CuNbN due to the precipitation-hardening mechanism.The extrapolation strength of creep rupture time of 105 h at 923 K for 22Cr15Ni3.5CuNbN is more valid
The corrosion behaviors of X65 steel in the artificial seawater at different hydrostatic pressures are investigated by potentiodynamic polarization measurements,electrochemical impedance spectroscopy measurements and weight loss measurements.The corroded
The precipitation of the lamellar-shaped M23C6 carbide within the dendritic matrix of a cobalt-base superalloy during thermal exposure at 1000 ℃ has been investigated.Such a precipitation is not commonly observed in cobalt-base superalloys.It is found tha