我厂试用成功一种配磨 V—平导轨副的新方法,简便易行,经生产应用效果较好,现简介如下。一、工艺方法特点利用水平仪直接控制各导轨面角度,用一种互补综合检具控制各导轨面的相对高度。角度控制如图1所示。将水平仪放置在磨头主轴套筒的一个与主轴迴转轴线相垂直的平面上。磨削时调整套筒的角度 I plant a successful trial with a new method of grinding V-flat rail pair, simple and easy, the production and application of better results are as follows. First, the characteristics of the method of using the level of direct control of the rail surface angle, with a complementary comprehensive control of the relative height of the rail surface. Angle control shown in Figure 1. Place the spirit level on a flat surface perpendicular to the axis of rotation of the spindle on the grinder spindle sleeve. Adjust the angle of the sleeve while grinding